
The AirTAC SEJ Adjustable Cylinder SEJ50X150-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø50mm unit covers an effective stroke of 100–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X150-50 is a double-acting, double-rod ISO 15552 profile cylinder with a 50 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so the output force is equal in both directions at 825 N each way at 0.5 MPa. A stop screw on the back rod lets you dial the retract stroke down from 150 mm, giving an effective stroke range of 100-150 mm without changing hardware.
This extruded aluminum barrel unit runs at 30-800 mm/s with a PT1/4 port and a Ø20 mm rod. The field-adjustable air cushion at both ends decelerates the load near the end of travel. Note this SKU lacks a magnet, so it cannot host CMSE or DMSE position sensors without modification. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X150-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 50 mm (100–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 50 mm window to find the exact 120 mm press depth for a bearing insert, using the equal 825 N both-way force to push and retract smoothly without re-piping.
Switch the retract stop from 150 mm to 100 mm to handle different box sizes on a cartoner, relying on the Ø20 mm double rod to maintain alignment without adding guides.
This 50 mm bore cylinder delivers 825 N both ways at 0.5 MPa. If your load is lighter, the 40 mm bore provides 528 N both ways; if heavier, the 63 mm bore provides 1402 N both ways. The 50 mm adjustment window is ideal for prototyping or dialing in a precise end position on the machine before locking the back-rod stop screw. If your stroke never needs to change after commissioning, a fixed-stroke SED cylinder is a simpler choice.
When matching an ISO 15552 replacement, verify the 150 mm nominal stroke, the 50 mm window, PT1/4 port, and your mounting type. The adjustable air cushion is not a mechanical brake; a plain SEJ does not hold position on air loss. For fail-safe holding, use an external rod lock or a BSED unit.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The adjustment window is 50 mm. You can mechanically dial the retract stroke down from the 150 mm nominal stroke to 100 mm, giving an effective stroke range of 100-150 mm. You set the exact end position via a stop screw on the back rod and lock it in place.
Because the rod exits both ends, the annulus area is identical in both directions. The output force is equal both ways: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.