
The AirTAC SEJ Adjustable Cylinder SEJ50X150-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø50mm unit covers an effective stroke of 100–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X150-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A rod exits both ends, meaning the annular area is identical in both directions, yielding an equal force of 825 N each way at 0.5 MPa. You can dial the retract end from 100 mm up to 150 mm to perfectly dial in your machine's end position.
A stop screw on the back rod mechanically shortens the retract stroke, which you lock in place after setting. The extruded aluminum barrel has no external tie rods, and the field-adjustable air cushion at both ends decelerates the load smoothly. This unit includes a magnet for CMSE or DMSE sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X150-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 50 mm (100–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 100-150 mm retract stop to perfectly fold varying carton heights, utilizing the 825 N both-way force to cleanly close flaps without repositioning hardware.
Fine-tune the insertion depth during machine commissioning, testing part fitment precisely within the 50 mm window before locking the back-rod stop screw.
Quickly adapt a single assembly station to different product heights by adjusting the retract stroke, leveraging the equal push and pull force for reliable handling.
Verify the 50 mm adjustment window covers your required 100-150 mm range before ordering. If you need less force, the adjacent 40 mm bore provides 528 N both ways at 0.5 MPa; if you need more, step up to the 63 mm bore for 1402 N. A fixed-stroke SED is sufficient if your end position never varies. For fail-safe position holding on air loss, add an external rod lock, as the cushion is not a brake. This PT1/4 ported cylinder is dimensionally interchangeable per ISO 15552.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 50 mm. The effective stroke range is 100-150 mm, which you set and lock during commissioning.
Because the rod exits both ends, force is equal in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.