
The AirTAC SEJ Adjustable Cylinder SEJ50X150-50SN is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø50mm unit covers an effective stroke of 100–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X150-50SN is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable retract stroke. A rod exits both ends, yielding identical annulus areas for equal force and speed in both directions. The NBR seals handle standard pneumatic temperatures reliably.
A 50 mm mechanical stop-screw window on the back rod lets you dial the retract end from 100 mm up to 150 mm. This eliminates the need to swap physical hardware when fine-tuning a machine end position. The extruded aluminum barrel contains no external tie rods, and the field-adjustable air cushion at both ends decelerates the load smoothly near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X150-50SN |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 50 mm (100–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the retract stroke from 100 to 150 mm to match varying carton depths precisely.
Quickly reposition a stop for different machined part heights without swapping cylinders. The 50 mm adjustment window allows fast mechanical commissioning on production lines.
Trial-fit bearings or pins by fine-tuning the end position to the exact 100-150 mm effective range. The double-rod design provides stable, equal force both ways for delicate assembly operations.
Verify the 50 mm adjustment window covers your required end-position range; here you can tune the retract stroke anywhere from 100 to 150 mm. If you need less force, the adjacent 40 mm bore provides 528 N at 0.5 MPa both ways. If your application demands more thrust, stepping up to the 63 mm bore yields 1402 N at 0.5 MPa. If your process never requires stroke changes, a fixed-stroke SED cylinder provides the same double-rod output more simply.
When replacing an ISO 15552 cylinder, match the 50 mm bore, 150 mm nominal stroke, PT1/4 port, and mounting style. The included -S magnet enables position detection with CMSE reed or DMSE electronic sensors. Note that the adjustable cushion and stop screw decelerate the load and set the mechanical end, but a plain SEJ does not hold position on air loss; for fail-safe holding, specify a BSED or an external rod lock. With a 150 mm stroke, ensure external guides support any side loads to protect the Ø20 mm rod.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The 50 mm adjustment window allows you to mechanically shorten the retract stroke. The effective stroke range is 100 mm up to the nominal 150 mm. You set the position via a stop screw on the back rod and lock it in place.
Because the rod exits both ends, force is identical in both directions. It generates 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.