
The AirTAC SEJ Adjustable Cylinder SEJ50X150-75 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø50mm unit covers an effective stroke of 75–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X150-75 is a double-acting, double-rod ISO 15552 profile cylinder with a 75 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so output is 825 N each way at 0.5 MPa. The retract end stop screw lets you dial the effective stroke anywhere from 75 mm up to 150 mm without swapping hardware.
This unit features a PT1/4 port, a 20 mm rod with an M16x1.5 thread, and adjustable air cushions at both ends to tame kinetic energy near stroke extremes. It carries no standard magnet, so external position sensing is not supported on this SKU.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X150-75 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 75 mm (75–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the retract stroke from 150 mm down to 75 mm to process different carton heights on a packaging line, utilizing the 825 N both-way force to push flaps securely.
Fine-tune the exact insertion depth of a 20 mm diameter pin during machine commissioning, locking the back-rod stop screw once the perfect 1154 N @0.7 MPa press fit is achieved.
Adjust the end stop on the fly for CNC fixture clamping, matching part variants precisely without changing out the entire cylinder assembly.
Verify the 75 mm adjustment window covers your required end-position range. If you need less fine-tune capacity, the next bore down (40 mm) yields 528 N both ways at 0.5 MPa; stepping up to 63 mm provides 1402 N. If your machine never requires stroke changes, a fixed-stroke SED saves length and cost. Remember the stop screw only sets the mechanical end and decelerates the stroke via cushion; it is not a lock. For fail-safe position holding on air loss, specify a BSED or an external rod lock. Since the nominal stroke is 150 mm, standard mounting (Basic, FA, LB, TC, FTC, TCM1, TCM2) applies without needing auxiliary side-load guides.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 75 mm window. You can set the effective stroke anywhere from 75 mm up to the full 150 mm, then lock the screw in place for your machine cycle.
Because it is a double-rod cylinder, force is equal in both directions. It provides 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.