
The AirTAC SEJ Adjustable Cylinder SEJ50X175-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø50mm unit covers an effective stroke of 155–175mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X175-20S is a double-acting, double-rod ISO 15552 profile cylinder with a 20mm adjustable stroke window, letting you dial the retract end from 155mm to 175mm. The integrated -S magnet supports CMSE reed and DMSE electronic sensors for end-of-stroke signaling.
A stop screw on the back rod mechanically sets the retract position, which you lock after fine-tuning the machine commissioning stop. The extruded aluminum barrel omits external tie rods for a clean ISO 15552 envelope, and field-adjustable air cushions at both ends decelerate the 30-800 mm/s motion near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X175-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 175 mm |
| Adjustment window | 20 mm (155–175 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×175 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 155-175mm clamping depth on a light-duty assembly press, using the 825 N both-way force to seat bearings without over-traveling.
Adjust the retract stop to match different carton heights on a packaging line, shifting the mechanical end by up to 20mm without swapping hardware.
Fine-tune the electrode touch position on a spot welding gun, relying on the equal push/pull force to maintain consistent tip pressure.
Verify the 20mm adjustment window covers your target positioning range, providing a 155-175mm effective stroke. If your application requires less force, the 40mm bore delivers 528 N each way at 0.5 MPa; if you need more clamping power, step up to the 63mm bore for 1402 N. If the exact 175mm stroke is fixed and never needs on-machine tuning, a standard SED double-rod cylinder is sufficient.
For a direct ISO 15552 replacement, match the 50mm bore, 175mm nominal stroke, PT1/4 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2 (this series omits FB, CA, CB, and CR brackets). Note that the adjustable cushion and stop screw decelerate motion and set the mechanical end, but a plain SEJ does not hold position on air loss—for fail-safe holding, specify a BSED or an external rod lock.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The retract stroke is adjustable up to 20mm via a stop screw on the back rod. The effective stroke range is 155mm to 175mm, which you lock in place after setting the exact end position.
Because it is a double-rod cylinder, the force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.