
The AirTAC SEJ Adjustable Cylinder SEJ50X175-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø50mm unit covers an effective stroke of 145–175mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X175-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30 mm adjustable stroke window. A rear stop screw lets you mechanically dial the retract end, yielding an effective stroke range of 145 to 175 mm.
This 50 mm bore unit includes a magnet (-S) for CMSE reed or DMSE electronic sensors. It runs at 30-800 mm/s, uses PT1/4 ports, and carries an M16x1.5 rod thread. Adjustable air cushions at both ends decelerate the load near stroke end, though they do not hold position on air loss.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X175-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 175 mm |
| Adjustment window | 30 mm (145–175 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×175 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 30 mm retract window to hit a precise 145-175 mm stop for sealing jaws, using the equal 825 N both-way force to consistently press carton flaps.
Fine-tune electrode approach distance during CNC commissioning, leveraging the double-rod design's identical extend and retract forces for balanced electrode pressure.
Verify the 30 mm adjustment window covers your required end-position variance, allowing precise machine commissioning without swapping hardware. At 0.5 MPa, this bore delivers 825 N both ways; if your load is lighter, step down to the 40 mm bore (528 N), or step up to the 63 mm bore (1402 N) for heavier demands. If you never need to fine-tune the stroke, a fixed-stroke SED is sufficient. For fail-safe holding, use a BSED or external rod lock, as the cushion and stop screw are not brakes. To match this ISO 15552 replacement, confirm the 175 mm stroke, 30 mm window, PT1/4 port, and magnet option.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The 30 mm stop screw on the back rod lets you adjust the retract stroke down from the 175 mm nominal. This gives an effective stroke range of 145 to 175 mm, which you lock in place after setting the exact end position.
Because the rod exits both ends, force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.