
The AirTAC SEJ Adjustable Cylinder SEJ50X180-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø50mm unit covers an effective stroke of 80–180mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X180-100S is a double-acting, double-rod ISO 15552 profile cylinder with a 100 mm adjustable stroke window. You can dial the retract end from 80 mm up to 180 mm to perfectly match a mechanical stop or fine-tune a machine position. A rod exits both ends, yielding equal force in both directions at 825 N each way at 0.5 MPa.
This extruded aluminum barrel design omits external tie rods for a clean ISO 15552 dimensional interchange. It includes a built-in magnet for CMSE reed and DMSE electronic sensors. The field-adjustable air cushion at both ends decelerates the motion near stroke end, but it is not a mechanical lock.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X180-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 180 mm |
| Adjustment window | 100 mm (80–180 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×180 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the retract end 80-180 mm to instantly adapt a packaging press for different carton heights without remounting hardware.
Use the 100 mm window to precisely set the end-of-stroke stop on a 825 N assembly press during initial machine commissioning.
Test variable clamping depths on a test fixture by adjusting the back-rod stop screw, locking it exactly where the 50 mm bore force is optimal.
The 100 mm adjustment window on this 50 mm bore is ideal for commissioning setups or changeovers between different part heights without swapping hardware. If you need less force, the 40 mm bore neighbor provides 528 N at 0.5 MPa both ways; if you need more, the 63 mm bore provides 1402 N. If your end position never changes, a fixed-stroke SED cylinder is sufficient. To replace an ISO 15552 unit, match the 50 mm bore, 180 mm stroke, PT1/4 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2. Note that this cylinder does not hold position on air loss; use an external rod lock for fail-safe holding.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The 100 mm adjustment window allows you to mechanically shorten the retract stroke from the nominal 180 mm down to 80 mm using a stop screw on the back rod, which you lock after setting the desired end position.
Because the rod exits both ends, the force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.