
The AirTAC SEJ Adjustable Cylinder SEJ50X180-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø50mm unit covers an effective stroke of 130–180mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X180-50 is a double-acting, double-rod ISO 15552 profile cylinder with a 50 mm adjustable stroke window. A rod exits both ends, yielding equal force in both directions—delivering 825 N each way at 0.5 MPa. By turning the stop screw on the back rod, you dial the retract end from 130 mm up to 180 mm.
This unit features an extruded aluminum barrel with no external tie rods, adjustable air cushions at both ends, and a PT1/4 port. Because this SKU lacks the -S magnet option, it does not support CMSE or DMSE position sensors without modification. The rear rod can also mount a cam or flag to trigger external proximity switches.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X180-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 180 mm |
| Adjustment window | 50 mm (130–180 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×180 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 50 mm window to seat raw aluminum billets of varying lengths precisely, using the equal 825 N both-way force to clamp and release without repositioning hardware.
Adjust the retract stroke from 130 to 180 mm on the fly to accommodate different carton depths on a packaging line, locking the back-rod stop screw once the format is set.
Fine-tune the mechanical stop position for mixed-product conveyor runs, relying on the 1154 N retract force at 0.7 MPa to halt heavy cardboard boxes consistently.
Verify the 50 mm adjustment window covers your required end-position range. If you need less fine-tune travel, the SEJ40X180-30 provides 528 N both ways at 0.5 MPa. If your load demands more thrust, stepping up to the SEJ63X180-50 yields 1402 N each way at 0.5 MPa. For fixed-position tasks without changeover, a standard SED double-rod cylinder offers the same equal-force output in a shorter body.
This cylinder uses a 20 mm rod with an M16x1.5 thread; ensure your external guides handle any side load, especially on strokes over 300 mm. The adjustable air cushion decelerates the load near stroke end but does not lock position—if you need fail-safe holding on air loss, add an external rod lock or BSED variant.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The SEJ50X180-50 has a stop screw on the rear rod that lets you mechanically shorten the retract stroke by up to 50 mm. This creates an effective stroke range of 130 to 180 mm, allowing you to fine-tune the end position during machine commissioning without changing the physical cylinder mount.
Because it is a double-rod cylinder, the force is identical in both extend and retract directions. It delivers 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.