
The AirTAC SEJ Adjustable Cylinder SEJ50X180-75 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø50mm unit covers an effective stroke of 105–180mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X180-75 is a double-acting, double-rod ISO 15552 profile cylinder with a 75 mm adjustable stroke window. You can dial the retract end position from 105 mm up to the nominal 180 mm, letting one unit cover a range of motion without swapping hardware.
The stroke is set via a stop screw on the rear rod; lock it down once your machine end-position is dialed in. This SKU omits the magnet, so it carries no position sensor. It features field-adjustable air cushions at both ends to decelerate the 20 mm rod near stroke extremes, and its extruded aluminum barrel ensures ISO 15552 dimensional interchangeability without external tie rods.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X180-75 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 180 mm |
| Adjustment window | 75 mm (105–180 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×180 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 75 mm retract window to set precise forming depth on aluminum blanks, relying on the equal 825 N both-way force to lift the tooling cleanly.
Adjust the effective stroke between 105 and 180 mm to accommodate different carton sizes on a line without physically remounting the cylinder.
Verify the 75 mm adjustment window covers your positioning range. If you need less force, the 40 mm bore provides 528 N both ways at 0.5 MPa; if you need more, step up to the 63 mm bore for 1402 N. If you never need to fine-tune the end position, a fixed-stroke SED saves complexity. Note that the air cushion and stop screw only set the mechanical end and decelerate near travel limits; they do not hold position on air loss. For fail-safe holding, use an external rod lock. When replacing an ISO 15552 cylinder, match the 50 mm bore, 180 mm stroke, PT1/4 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2. At 180 mm stroke, external guides are recommended to manage side loads.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The SEJ50X180-75 has a 75 mm adjustment window via a stop screw on the rear rod, allowing the effective retract stroke to be fine-tuned anywhere from 105 mm up to the nominal 180 mm.
Because it is a double-rod cylinder, force is equal in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.