
The AirTAC SEJ Adjustable Cylinder SEJ50X65-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø50mm unit covers an effective stroke of 35–65mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X65-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30mm adjustable stroke window. You can dial the retract end from 35mm up to the nominal 65mm, letting you fine-tune the exact end position during machine commissioning without swapping hardware.
This extruded aluminum profile cylinder includes a -S magnet for CMSE reed or DMSE electronic sensors. It uses adjustable air cushions at both ends to decelerate the load near stroke end. The rear rod mechanically stops the stroke via a lockable stop screw, and the overall length is longer than a fixed single-rod SE cylinder to accommodate this adjustment mechanism.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X65-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 65 mm |
| Adjustment window | 30 mm (35–65 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×65 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 35-65mm retract window to set the exact nozzle height for various bottle openings, utilizing the equal 825 N both-way force to lift and lower the dispense head reliably.
Adjust the mechanical stop screw on the fly when switching between different carton sizes, using the 30mm window to match part heights without changing cylinder hardware.
Fine-tune the insertion depth of a 50mm bore pin press during prototype runs, relying on the 1154 N both-way force at 0.7 MPa to seat the component precisely.
Verify the 30mm adjustment window covers your required positioning range, giving an effective 35-65mm stroke. If you need less force, stepping down to the 40mm bore provides 528 N both ways at 0.5 MPa; if your application requires more thrust, stepping up to the 63mm bore yields 1402 N both ways. If the end position never changes after commissioning, a fixed-stroke SED double-rod cylinder is sufficient. For a direct ISO 15552 replacement, match the 50mm bore, 65mm nominal stroke, 30mm window, PT1/4 port, and your specific mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Note that the adjustable air cushion and mechanical stop screw decelerate the load and set the end position, but they do not lock or hold the cylinder in place upon air loss. For fail-safe position holding, you must use an external rod lock or a BSED series cylinder.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The 30mm adjustment window allows you to mechanically shorten the retract stroke via a lockable stop screw on the back rod. The effective stroke range is 35mm up to the nominal 65mm, which is ideal for dialing in an exact end position on the machine.
Because the rod exits both ends, the force is identical in both directions. It outputs 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.