
The AirTAC SEJ Adjustable Cylinder SEJ50X70-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø50mm unit covers an effective stroke of 60–70mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X70-10S is a double-acting, double-rod ISO 15552 profile cylinder with a 10mm adjustable stroke window, allowing you to dial the retract end from 60mm up to 70mm. A rod exits both ends, yielding identical annulus areas and an equal force of 825 N each way at 0.5 MPa (1154 N at 0.7 MPa). The integrated -S magnet supports CMSE reed and DMSE electronic sensors for position feedback.
You set the retract position via a stop screw on the back rod, then lock it in place—ideal for fine-tuning end positions directly on the machine without swapping hardware. The extruded aluminum barrel omits external tie rods, and field-adjustable air cushions at both ends decelerate the load near the stroke ends. Note that this stop screw and cushion only set the mechanical end and decelerate; they do not hold position on air loss.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X70-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 70 mm |
| Adjustment window | 10 mm (60–70 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 60-70mm press depth for bearing inserts during machine commissioning, leveraging the 825 N both-way force for consistent insertion.
Quickly adjust the retract stop to accommodate different product heights on a packaging line without changing the cylinder hardware.
Use the equal push and pull force and 10mm adjustment window to find the optimal end position for a forming jig before finalizing hard stops.
This 50mm bore delivers 825 N both ways at 0.5 MPa. If your application needs less force, step down to the 40mm bore (528 N both ways); if you need more, step up to the 63mm bore (1402 N both ways). The 10mm adjustment window is perfect for precisely matching a variable stop or fine-tuning a press fit during commissioning. If your end position never changes, a fixed-stroke SED provides the same equal-force double-rod action without the adjustment mechanism.
For an exact ISO 15552 replacement, match the 50mm bore, 70mm nominal stroke, 10mm window, PT1/4 port, and your required mounting (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Because the stroke is under 300mm, side-load stress is minimal, but always ensure linear guidance for optimal seal life.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The retract end features a stop screw on the back rod that allows you to adjust the effective stroke from 60mm up to the nominal 70mm, covering a 10mm window for precise end-position tuning.
Because the rod exits both ends, the force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.