verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ50X70-20S

The AirTAC SEJ Adjustable Cylinder SEJ50X70-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø50mm unit covers an effective stroke of 50–70mm without changing cylinders. Force is equal in both directions.

  • BoreØ50 mm
  • Nominal stroke70 mm
  • Adjust window20 mm
  • Effective stroke50–70 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$94.67 $102.17Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ50 stroke, mounting and version on one page All SEJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ50X70-20S

The AirTAC SEJ50X70-20S is a double-acting, double-rod ISO 15552 profile cylinder with a 20mm adjustable stroke window, yielding an effective stroke range of 50-70mm. A rod exits both ends, providing identical annulus areas and equal force in both directions—delivering 825N at 0.5MPa and 1154N at 0.7MPa each way.

A stop screw on the back rod lets you dial in the retract end position precisely during machine commissioning, which must be locked after setting. The included -S magnet supports CMSE reed and DMSE electronic sensors for end-of-stroke detection. Adjustable air cushions at both ends decelerate the load near stroke end, but do not function as a fail-safe lock.

Airtac SEJ Adjustable Cylinder SEJ50X70-20S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ50X70-20S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ50 mm
Nominal stroke70 mm
Adjustment window20 mm (50–70 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressureForce (both directions)
0.5 MPa825 N
0.7 MPa1155 N
Max (@1.0 MPa)168 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ50X70-20S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
50Bore size in mm.
×70Nominal stroke length in mm.
-20Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ50X70-20S Is Used

tune

Press Fit Commissioning

Dial the 20mm stop screw to fine-tune the 50-70mm press depth for electronic connector pins, leveraging the 825N both-way force for consistent insertion.

swap_horiz

Packaging Changeover

Adjust the retract end to accommodate different carton heights on a packaging line, using the equal both-way thrust to push and pull the folding mechanism.

precision_manufacturing

Component Trial Positioning

Set the exact end-stop during CNC lathe loader prototyping, locking the back-rod screw once the optimal 50-70mm transfer reach is found.

Is the Airtac SEJ Adjustable Cylinder SEJ50X70-20S the Right Cylinder?

This 50mm bore provides 825N both ways at 0.5MPa. If your load is lighter, the next bore down (40mm) yields 528N both ways; for heavier demands, stepping up to the 63mm bore gives 1402N at 0.5MPa. The 20mm adjustment window is ideal for fine-tuning a 50-70mm end position without swapping hardware. If your stroke requirement is fixed, a standard SED double-rod cylinder is sufficient.

For position holding on air loss, note that this cylinder does not inherently lock; an external rod lock or a BSED unit is required. Dimensionally interchangeable per ISO 15552, verify your replacement match by bore, stroke, PT1/4 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).

AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (20mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 20mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ50X70-20S FAQ

The 20mm adjustment window allows you to mechanically shorten the retract stroke via a back-rod stop screw, giving an effective stroke range of 50 to 70mm. You must lock the screw after setting your desired end position.

Because the rod exits both ends, the force is identical in both directions: 825N at 0.5MPa, 1154N at 0.7MPa, and a maximum of 168kgf at 1.0MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ50X70-20S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ50X70-20S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.