verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ50X700-100S

The AirTAC SEJ Adjustable Cylinder SEJ50X700-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø50mm unit covers an effective stroke of 600–700mm without changing cylinders. Force is equal in both directions.

  • BoreØ50 mm
  • Nominal stroke700 mm
  • Adjust window100 mm
  • Effective stroke600–700 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$199.57 $207.07Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ50 stroke, mounting and version on one page All SEJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ50X700-100S

The AirTAC SEJ50X700-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100 mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This provides an equal force of 825 N each way at 0.5 MPa, ensuring perfectly balanced motion for your tooling.

You can dial the retract end from 600 mm up to 700 mm via a stop screw on the back rod, allowing you to fine-tune the exact end position directly on the machine. The extruded aluminum barrel omits external tie rods, and the included -S magnet enables precise end-of-stroke detection using CMSE reed or DMSE electronic sensors.

Airtac SEJ Adjustable Cylinder SEJ50X700-100S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ50X700-100S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ50 mm
Nominal stroke700 mm
Adjustment window100 mm (600–700 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressureForce (both directions)
0.5 MPa825 N
0.7 MPa1155 N
Max (@1.0 MPa)168 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ50X700-100S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
50Bore size in mm.
×700Nominal stroke length in mm.
-100Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ50X700-100S Is Used

precision_manufacturing

Press Feed Dial-In

Delivers 825 N both ways to fine-tune a 600-700 mm press feed stroke, matching varying material thicknesses perfectly during commissioning.

conveyor_belt

Variable-Stop Diverter

Adjusts the retract end position to alter the stop distance on a conveyor, accommodating different box sizes without changing hardware.

straighten

Tube Straightener Setup

Provides equal push and pull force for a long-stroke straightening fixture, allowing precise end-position tuning to eliminate material kinks.

Is the Airtac SEJ Adjustable Cylinder SEJ50X700-100S the Right Cylinder?

Confirm the 100 mm adjustment window covers your required positioning range. If you need less fine-tune travel, a fixed-stroke SED might suffice. For sizing, stepping down to a 40 mm bore yields 528 N both ways at 0.5 MPa, while stepping up to a 63 mm bore provides 1402 N. At 700 mm, the stroke is highly susceptible to side loads, so external guides are essential to prevent rod binding.

The adjustable air cushions at both ends decelerate the load near the stroke end but do not hold position on air loss; for fail-safe holding, specify an external rod lock. This PT1/4 ported cylinder is dimensionally interchangeable per ISO 15552.

AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (100mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 100mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ50X700-100S FAQ

The retract stroke is adjustable via a back-rod stop screw over a 100 mm window, giving an effective stroke range of 600 mm up to the nominal 700 mm. You lock the screw after setting the exact end position.

Because the rod exits both ends, force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ50X700-100S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ50X700-100S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.