
The AirTAC SEJ Adjustable Cylinder SEJ50X700-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø50mm unit covers an effective stroke of 660–700mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X700-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40mm adjustable retract stroke, yielding an effective travel range of 660 to 700mm. A rod exits both ends, ensuring the annular area remains identical in both directions. This provides an equal output force of 825N each way at 0.5 MPa.
The stroke is mechanically shortened via a stop screw on the back rod, allowing you to dial in a precise end position during machine commissioning and lock it down without swapping hardware. Equipped with a -S magnet, it supports CMSE reed and DMSE electronic sensors for exact end-of-stroke detection. It uses adjustable air cushions at both ends to decelerate loads smoothly.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X700-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 700 mm |
| Adjustment window | 40 mm (660–700 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×700 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivering 825N of equal both-way force, the 40mm window lets you perfectly dial in the 660-700mm press end-position during commissioning without machining new spacers.
Adjust the retract stop on the fly to change where the 700mm stroke ends, accommodating different carton heights on the fly while maintaining 825N of holding force.
Use the double-rod design to mount a rear cam and test different gate trigger points across the 660-700mm range before locking the stop screw for production.
This 50mm bore delivers 825N both-way force at 0.5 MPa. If your load is lighter, step down to the 40mm bore for 528N; for heavier demands, step up to the 63mm bore providing 1402N. The 40mm adjustment window is excellent for variable-stop changeover to different part heights.
At 700mm of travel, the extended rod is highly susceptible to side loads; ensure external guides support the payload to prevent binding. Remember that the adjustable air cushion only decelerates the load near the stroke end—it is not a safety lock. The cylinder will not hold position on air loss; for fail-safe holding, use an external rod lock or BSED. For a fixed 700mm stroke without the adjustment hardware, the SED series is sufficient. Ensure your ISO 15552 replacement matches the PT1/4 port, M16x1.5 rod thread, and chosen mounting from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the back rod mechanically limits the retract stroke. You can dial the end position up to 40mm, giving an effective stroke range of 660 to 700mm. Once set, you lock the screw in place.
Because the rod exits both ends, the force is identical in both directions. It generates 825N at 0.5 MPa, 1154N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.