
The AirTAC SEJ Adjustable Cylinder SEJ50X80-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø50mm unit covers an effective stroke of 70–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X80-10S is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable retract stroke. A rod exits both ends, yielding equal force in both directions at about 825 N each way at 0.5 MPa. The -10 window lets you dial the retract end up to 10 mm, giving an effective stroke range of 70-80 mm.
This extruded aluminum barrel design includes field-adjustable air cushions at both ends to decelerate the piston near stroke end. The included -S magnet enables position sensing with CMSE reed or DMSE electronic sensors. It uses a PT1/4 port and a 20 mm rod with an M16x1.5 thread.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X80-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 10 mm (70–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 70-80 mm effective stroke to precisely match folding flaps on varying carton sizes, utilizing the 825 N both-way force at 0.5 MPa.
Fine-tune the retract stop during commissioning to set exact clamping depth on machined parts without swapping hardware.
Leverage the 10 mm retract adjustment to test multiple end positions for different part heights on a single assembly fixture.
Confirm the 10 mm adjustment window covers your end-position tuning needs before selecting. If you need less force, the 40 mm bore provides 528 N both ways at 0.5 MPa; if you need more, step up to the 63 mm bore for 1402 N both ways. For fixed-stroke applications without fine-tuning, a standard SED double-rod cylinder is sufficient. As an ISO 15552 cylinder, it dimensionally interchanges by matching the 50 mm bore, 80 mm stroke, PT1/4 port, and mounting choice from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the air cushion and stop screw decelerate the load but do not hold position on air loss; use an external rod lock for fail-safe holding.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke over a 10 mm window. You can dial the effective stroke from 70 mm up to 80 mm, then lock it in place for precise end-position tuning on the machine.
Because the rod exits both ends, force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.