
The AirTAC SEJ Adjustable Cylinder SEJ50X80-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø50mm unit covers an effective stroke of 60–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X80-20S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas so thrust is equal in both directions at 825 N (0.5 MPa). A stop screw on the back rod lets you dial the retract stroke over a 20 mm window, setting an effective 60-80 mm range without swapping hardware.
This extruded-aluminum barrel omits external tie rods and includes field-adjustable air cushions at both ends to manage end-of-stroke deceleration. The integrated magnet (-S) supports CMSE reed and DMSE electronic sensors for position detection, while the M16x1.5 rod thread handles mounting.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X80-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 20 mm (60–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 60-80 mm retract stroke to perfectly time the sealing jaw on a flow-wrapper, using the 825 N both-way force to consistently press carton flaps.
Quickly readjust the mechanical stop screw to accommodate varying box heights on a packaging conveyor without disassembling the line hardware.
Use the 20 mm window to test exact clamping locations on a light-duty assembly fixture before locking the final end position.
The 20 mm adjustment window is ideal for fine-tuning a precise end position during commissioning or matching variable stop heights. If you need less force, the adjacent 40 mm bore delivers 528 N both ways at 0.5 MPa; if 825 N is insufficient, step up to the 63 mm bore for 1402 N. A fixed-stroke SED is sufficient if your machine stops never vary. For direct ISO 15552 replacement, verify the 80 mm stroke, 20 mm window, PT1/4 port, and magnet option. Note: the air cushion only decelerates the load near stroke end; it does not hold position on air loss.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The stop screw on the rear rod allows you to adjust the retract stroke up to 20 mm. The effective stroke range is 60 to 80 mm, which you can lock in place after setting your exact end position.
Because the double-rod design provides equal annulus area both ways, thrust is identical in extend and retract: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.