
The AirTAC SEJ Adjustable Cylinder SEJ50X80-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø50mm unit covers an effective stroke of 50–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X80-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a mechanically adjustable retract stroke. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at about 825 N each way at 0.5 MPa. You can dial the retract end up to 30 mm, creating an effective stroke range of 50-80 mm.
This extruded aluminum barrel design includes field-adjustable air cushions at both ends to manage deceleration. The built-in -S magnet supports CMSE reed and DMSE electronic sensors for position feedback. A lock screw on the back rod mechanically sets the end position during commissioning, which you tighten once the exact stop is found.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X80-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 30 mm (50–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 50-80 mm tray stop position on a packaging line. The 825 N both-way force securely pushes trays, while the 30 mm window lets operators fine-tune the end location during changeover.
Trial fit small bearings or pins. The double-rod design provides equal 825 N extend and retract force, and the adjustable back-rod stop screw lets you set the exact pressing depth without swapping hardware.
Adjust a conveyor sorting gate for different package heights. The 30 mm stroke window allows quick mechanical repositioning of the gate, while the stable double-rod resists side twisting.
Confirm the 30 mm adjustment window covers your positioning needs, allowing the retract stroke to be precisely trimmed between 50 and 80 mm. If you require less force, the adjacent bore down is 40 mm providing 528 N both ways at 0.5 MPa; if you need more power, stepping up to the 63 mm bore yields 1402 N both ways at 0.5 MPa. Choose a fixed-stroke SED cylinder if the end position never varies and does not require field tuning.
Because the plain SEJ50X80-30S does not hold position on air loss, point to a BSED or an external rod lock for fail-safe load holding. The adjustable air cushion only decelerates the piston near stroke end; it is not a brake. This unit uses a PT1/4 port and a Ø20 mm rod with an M16x1.5 thread. Ensure your ISO 15552 replacement matches the 50 mm bore, 80 mm nominal stroke, 30 mm window, and magnet option.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke up to 30 mm. This creates an effective stroke range of 50-80 mm. You lock the screw after finding the exact end position.
Because it is a double-rod cylinder, the force is equal both ways: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.