verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ50X80-40S

The AirTAC SEJ Adjustable Cylinder SEJ50X80-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø50mm unit covers an effective stroke of 40–80mm without changing cylinders. Force is equal in both directions.

  • BoreØ50 mm
  • Nominal stroke80 mm
  • Adjust window40 mm
  • Effective stroke40–80 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$97.21 $104.71Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ50 stroke, mounting and version on one page All SEJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ50X80-40S

The AirTAC SEJ50X80-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40mm adjustable stroke window, yielding an effective retract range of 40 to 80mm. A rod exits both ends, ensuring the annulus area remains identical in both directions. This delivers an equal force of 825N each way at 0.5 MPa, preventing the speed and force discrepancies common to single-rod units.

A mechanical stop screw on the back rod allows you to dial in the exact end position during machine commissioning without swapping hardware. You must lock the stop screw after setting your dimension. This 50mm bore unit includes a magnet for CMSE reed or DMSE electronic sensors, uses PT1/4 ports, and relies on field-adjustable air cushions at both ends to decelerate the load near stroke end.

Airtac SEJ Adjustable Cylinder SEJ50X80-40S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ50X80-40S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ50 mm
Nominal stroke80 mm
Adjustment window40 mm (40–80 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressureForce (both directions)
0.5 MPa825 N
0.7 MPa1155 N
Max (@1.0 MPa)168 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ50X80-40S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
50Bore size in mm.
×80Nominal stroke length in mm.
-40Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ50X80-40S Is Used

tune

Press Stroke Calibration

Dial in the exact 40-80mm clamping reach on a small pneumatic press, using the 825N both-way force to seat bearings without over-traveling.

swap_horiz

Packaging Changeover

Adjust the retract end position on the fly to accommodate different carton heights on a packaging line, locking the back-rod stop screw for repeatable stops.

precision_manufacturing

Component Trial Fit

Test multiple part heights during CNC lathe loading, using the equal push and pull forces to gently probe part alignment before finalizing the fixture.

Is the Airtac SEJ Adjustable Cylinder SEJ50X80-40S the Right Cylinder?

Confirm the 40mm adjustment window covers your required end-position variance. If your application needs less fine-tuning, the fixed-stroke SED version is sufficient. For sizing, the adjacent 40mm bore provides 528N both ways at 0.5 MPa, while stepping up to the 63mm bore yields 1402N. If you are replacing an existing ISO 15552 cylinder, match the 50mm bore, 80mm nominal stroke, 40mm window, PT1/4 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that the air cushion and mechanical stop only decelerate the load; they do not hold position on air loss. For fail-safe holding, specify an external rod lock.

AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (40mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 40mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ50X80-40S FAQ

A stop screw on the rear rod mechanically shortens the retract stroke over a 40mm window. This means your effective stroke range is 40mm up to the full nominal 80mm, allowing precise end-position tuning on the machine without changing the cylinder hardware.

Because it is a double-rod cylinder, the force is equal in both directions: 825N at 0.5 MPa, 1154N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ50X80-40S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ50X80-40S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.