
The AirTAC SEJ Adjustable Cylinder SEJ50X80-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø50mm unit covers an effective stroke of 30–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X80-50S is a double-acting, double-rod ISO 15552 profile cylinder with a 50 mm adjustable stroke window. You can dial the retract end from 30 mm up to 80 mm to perfectly match a machine stop.
This unit includes a magnet for CMSE reed or DMSE electronic sensors. The field-adjustable air cushion at both ends decelerates the load near the stroke ends, while the back-rod stop screw lets you lock the exact final position on the machine without swapping hardware.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X80-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 50 mm (30–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivers 825 N both ways at 0.5 MPa for pick-and-place heads. The 50 mm window lets you fine-tune the 30 to 80 mm retract stop during commissioning without machining new spacers.
Switching packaging line tooling for different carton heights is fast. Dial the mechanical stop screw to the exact new end position and lock it, using the 50 mm adjustment range.
Use the 1154 N both-way force at 0.7 MPa for light press fitting. The adjustable stroke allows precise trial positioning of the 30 to 80 mm travel to prevent over-travel.
The 50 mm adjustment window is ideal if you are commissioning a machine and need to fine-tune a 30 to 80 mm end position. If you need less force, the next bore down (40 mm) provides 528 N both ways at 0.5 MPa; if you need more thrust, stepping up to the 63 mm bore gives 1402 N both ways. If your end position never changes, a fixed-stroke SED is sufficient. For replacing an ISO 15552 cylinder, match the 50 mm bore, 80 mm nominal stroke, PT1/4 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2. Note that the air cushion only decelerates the load; it does not hold position on air loss, so use an external rod lock for fail-safe holding.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The 50 mm adjustment window allows you to mechanically dial the retract stroke from 30 mm up to the 80 mm nominal stroke. You set the exact end position with a stop screw on the back rod and lock it in place.
Because the rod exits both ends, force is equal in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.