
The AirTAC SEJ Adjustable Cylinder SEJ50X80-50SN is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø50mm unit covers an effective stroke of 30–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X80-50SN is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions. You get 825 N of thrust and pull each way at 0.5 MPa, and 1154 N at 0.7 MPa.
This unit features a 50mm adjustable stroke window via a stop screw on the back rod, letting you dial the effective retract stroke anywhere from 30mm to 80mm. It includes an NBR seal, a built-in magnet for CMSE or DMSE sensors, and field-adjustable air cushions at both ends to fine-tune end-of-stroke deceleration.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X80-50SN |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 50 mm (30–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 30-80mm retract stop during press commissioning to find the perfect forming distance without swapping hardware.
Adjust the end position on the fly to match different pallet thicknesses, using the equal 825 N both-way force to push and pull loads.
Fine-tune the jaw opening width during machine setup, locking the back-rod stop screw once the optimal grip distance is achieved.
The 50mm bore delivers 825 N both ways at 0.5 MPa. If your load is lighter, step down to the 40mm bore for 528 N; for heavier positioning, step up to the 63mm bore for 1402 N. The 50mm adjust window is ideal for commissioning setups where the exact stop position is unknown until the machine is running.
For fixed end positions that never change, a standard SED double-rod cylinder is sufficient. Note that the adjustable cushion and stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock. This cylinder is dimensionally interchangeable per ISO 15552, so verify your port (PT1/4), mounting, and magnet needs when replacing.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The cylinder has a 50mm adjustment window, meaning you can mechanically dial the retract stroke from 30mm up to the full 80mm. You set the position with a stop screw on the back rod and lock it in place.
Because the rod exits both ends, force is equal in both directions. It generates 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.