verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ63X120-30S

The AirTAC SEJ Adjustable Cylinder SEJ63X120-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø63mm unit covers an effective stroke of 90–120mm without changing cylinders. Force is equal in both directions.

  • BoreØ63 mm
  • Nominal stroke120 mm
  • Adjust window30 mm
  • Effective stroke90–120 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$123.26 $130.76Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ63 stroke, mounting and version on one page All SEJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ63X120-30S

The AirTAC SEJ63X120-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30 mm adjustable stroke window. A stop screw on the back rod lets you dial the retract end from 90 to 120 mm, enabling precise on-machine end-position tuning without swapping hardware. Because a rod exits both ends, the annulus area is identical in both directions, yielding an equal 1402 N of drive force each way at 0.5 MPa.

This 63 mm bore unit includes a magnet for CMSE reed or DMSE electronic sensors and uses PT3/8 ports. Field-adjustable air cushions at both ends decelerate the load near stroke end. Note that the adjustable stop and cushions only set the mechanical end and deceleration; they do not hold position on air loss. For fail-safe holding, an external rod lock or BSED series is required.

Airtac SEJ Adjustable Cylinder SEJ63X120-30S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ63X120-30S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ63 mm
Nominal stroke120 mm
Adjustment window30 mm (90–120 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressureForce (both directions)
0.5 MPa1402 N
0.7 MPa1962 N
Max (@1.0 MPa)286 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ63X120-30S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
63Bore size in mm.
×120Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ63X120-30S Is Used

tune

Packaging Machine Changeover

Dial in the 90-120 mm retract stroke to match varying carton heights on a packaging line, leveraging the 1962 N both-way force at 0.7 MPa to positively shift the folding mechanism.

precision_manufacturing

CNC Lathe Tool Positioning

Use the back-rod stop screw to fine-tune the exact retracted end position of a bar puller or parts catcher, ensuring the 1402 N both-way force securely handles the stock without deflection.

sync_alt

Conveyor Divert Gate Trial

During commissioning, adjust the divert gate end-point over the 30 mm window to hit the exact product transfer angle, relying on equal push and pull forces for smooth bi-directional routing.

Is the Airtac SEJ Adjustable Cylinder SEJ63X120-30S the Right Cylinder?

Verify the 30 mm adjustment window covers your required 90-120 mm travel range for commissioning fine-tunes or part changeovers. If your application needs less force, stepping down to the 50 mm bore yields 825 N both ways at 0.5 MPa; if you need more power, the 80 mm bore provides 2268 N both ways at 0.5 MPa. If you do not need variable end-positioning, a fixed-stroke SED cylinder is sufficient. When replacing an ISO 15552 unit, match the 120 mm nominal stroke, 30 mm window, PT3/8 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.

AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ63X120-30S FAQ

A mechanical stop screw on the rear rod shortens the retract stroke over a 30 mm window. You can set the effective travel anywhere from 90 mm up to the full 120 mm, then lock it in place for precise end-positioning.

Because the double-rod design yields equal force both ways, it delivers 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ63X120-30S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ63X120-30S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.