
The AirTAC SE63 Standard Cylinder SE63X120 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 120mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X120 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa and 2182 N at 0.7 MPa. It features a 63 mm bore, a 120 mm stroke, and a PT3/8 port. Built with a square extruded aluminum barrel, it eliminates external tie rods entirely, offering a compact, corrosion-resistant body that mounts flush against machine frames.
This model uses a field-adjustable pneumatic cushion at both ends to decelerate the piston near stroke limits, allowing you to fine-tune end-stop impact for high-speed cycling. Note that this specific SKU lacks the -S magnet option, so it does not support direct CMSE or DMSE position sensing without modification.
| Model | Airtac SE63 Standard Cylinder SE63X120 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 1559 N of push force at 0.5 MPa to secure aluminum engine blocks during CNC machining, utilizing the 120 mm stroke to clear the work envelope before retraction.
Actuates routing gates on a beverage conveyor, using the adjustable end cushions to soften stops at 30-800 mm/s without jarring the glass containers.
Drives the mechanical arms that tuck corrugated flaps on a case packer, where the no-tie-rod extruded profile prevents dust buildup and allows easy wipe-down.
If your assembly requires less force, the SE50X120 provides 982 N of push at 0.5 MPa, whereas stepping up to the SE80X120 yields 2513 N for heavier loads. The 63 mm bore hits a strong middle ground for general automation. Remember that a plain SE cylinder relies on live air pressure to maintain position; if air is lost, the piston drifts, so use a BSE rod lock for fail-safe holding.
With a 120 mm stroke and a 20 mm rod thread (M16x1.5), side loading is moderate but manageable. For any application exceeding 300 mm of stroke, always specify an external guide to prevent rod-bearing bending. Because it adheres to the ISO 15552 / VDMA 24562 interface, you can drop this cylinder directly into existing footprints using standard LB, FA, or TC mounting hardware.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X120 generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
Yes, the SE63X120 is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it into existing ISO 15552 mounting hardware without modifications. Note that this specific SKU has no built-in magnet (-S), so it will not trigger CMSE or DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.