
The AirTAC SEJ Adjustable Cylinder SEJ63X125-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø63mm unit covers an effective stroke of 25–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X125-100S is a double-acting, double-rod ISO 15552 profile cylinder offering a mechanically adjustable retract stroke. A stop screw on the rear rod lets you dial the retract end over a 100 mm window, yielding an effective stroke range of 25 to 125 mm.
This 63 mm bore unit features a PT3/8 port, a Ø20 mm rod with an M16x1.5 thread, and adjustable air cushions at both ends to manage deceleration. The built-in S magnet supports CMSE reed and DMSE electronic sensors for position feedback. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR styles.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X125-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 100 mm (25–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 100 mm window to precisely set the 1402 N clamping end-position on progressive stamping dies during initial machine commissioning.
Adjust the retract stroke on the fly to accommodate different pallet heights in a packaging line without swapping out hardware.
Fine-tune the electrode approach distance on a 63 mm bore welding fixture, leveraging the equal both-way force for consistent retraction.
Verify that your required end-position falls within the 25 to 125 mm effective range. If you need less force, the adjacent 50 mm bore provides 825 N at 0.5 MPa; if you need more, stepping up to the 80 mm bore yields 2268 N both ways. If your machine never requires stroke changes, a fixed-stroke SED simplifies the setup. Note that the adjustable stop screw and air cushions only set the mechanical end and decelerate the piston; they do not hold position on air loss. For fail-safe holding, specify an external rod lock. When replacing an ISO 15552 cylinder, match the 63 mm bore, 125 mm nominal stroke, PT3/8 port, and mounting hardware.
AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke over a 100 mm window. The effective stroke range is 25 to 125 mm. Once you set the desired end-position, you lock the screw in place on the machine.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.