verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ63X125-10S

The AirTAC SEJ Adjustable Cylinder SEJ63X125-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø63mm unit covers an effective stroke of 115–125mm without changing cylinders. Force is equal in both directions.

  • BoreØ63 mm
  • Nominal stroke125 mm
  • Adjust window10 mm
  • Effective stroke115–125 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$123.26 $130.76Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ63 stroke, mounting and version on one page All SEJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ63X125-10S

The AirTAC SEJ63X125-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10 mm adjustable stroke window. You can dial the retract end from 115 to 125 mm, letting you fine-tune the machine stop position during commissioning without swapping hardware. A rod exits both ends, meaning the annulus area is identical in both directions. This delivers an equal force of 1402 N each way at 0.5 MPa.

This bore 63 mm unit uses a PT3/8 port and a Ø20 mm rod with an M16x1.5 thread. It includes a magnet for position sensing. The retract mechanism relies on a back-rod stop screw; set your end position, then lock it down. Unlike fixed bumpers, it provides field-adjustable air cushions at both ends to decelerate the load smoothly near stroke completion.

Airtac SEJ Adjustable Cylinder SEJ63X125-10S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ63X125-10S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ63 mm
Nominal stroke125 mm
Adjustment window10 mm (115–125 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressureForce (both directions)
0.5 MPa1402 N
0.7 MPa1962 N
Max (@1.0 MPa)286 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ63X125-10S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
63Bore size in mm.
×125Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ63X125-10S Is Used

precision_manufacturing

Press Stroke Calibration

Delivering 1402 N of both-way force at 0.5 MPa, this cylinder dials in the exact 115-125 mm press depth for seating bearings without remounting hardware.

swap_horiz

Packaging Changeover

Swap between different carton heights on a packaging line by adjusting the retract stroke 10 mm, utilizing the equal push and pull forces for consistent flap folding.

tune

Dispenser Positioning

Fine-tune the retract end position of an adhesive dispensing head during line commissioning, locking the back-rod stop screw once the perfect 120 mm drop is found.

Is the Airtac SEJ Adjustable Cylinder SEJ63X125-10S the Right Cylinder?

Verify the 10 mm adjustment window covers your required end-position variance. If you need less force, the adjacent 50 mm bore provides 825 N at 0.5 MPa; if you need more, step up to the 80 mm bore for 2268 N. If your stroke never changes after commissioning, a fixed-stroke SED is sufficient. For replacing an ISO 15552 cylinder, match the 125 mm stroke, PT3/8 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that the air cushion and stop screw only decelerate the load; they do not hold position on air loss, so add an external rod lock for fail-safe holding.

AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ63X125-10S FAQ

The retract stroke adjusts over a 10 mm window, giving an effective stroke range of 115 to 125 mm. You set the exact end position using a stop screw on the back rod, then lock it in place.

Because the rod exits both ends, force is equal in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ63X125-10S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ63X125-10S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.