
The AirTAC SEJ Adjustable Cylinder SEJ63X125-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø63mm unit covers an effective stroke of 105–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X125-20S is a double-acting, double-rod ISO 15552 profile cylinder with a 20 mm adjustable stroke window. A stop screw on the rear rod lets you dial the retract end from 105 mm up to the nominal 125 mm, perfect for fine-tuning a machine end position without swapping hardware.
This bore uses a PT3/8 port and a Ø20 mm rod with an M16x1.5 thread. The included -S magnet enables position detection with CMSE reed or DMSE electronic sensors. Adjustable air cushions at both ends decelerate the load near stroke end, while the extruded aluminum ISO 15552 body ensures strict dimensional interchangeability.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X125-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 20 mm (105–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 20 mm retract window to match varying material thicknesses in a stamping press, using the 1962 N both-way force to consistently clamp the workpiece.
Adjust the effective stroke between 105 and 125 mm on the fly when switching carton sizes on a packaging line, avoiding mechanical hardware swaps.
Act as an adjustable flight stop on a conveyor, using the equal push and pull forces to positively position pallets without sagging on the retract.
Verify the 20 mm adjustment window covers your required end-position range. If you need less force, stepping down to the 50 mm bore provides 825 N both ways at 0.5 MPa; if you need more thrust, the 80 mm bore yields 2268 N at 0.5 MPa. If your stroke never changes after commissioning, a fixed-stroke SED is sufficient. Remember that the air cushion and stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss, so specify an external rod lock for fail-safe holding.
AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 20 mm window. You can dial the effective stroke anywhere from 105 mm up to the nominal 125 mm, then lock it in place.
Because it is a double-rod cylinder, force is equal in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.