verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ63X125-30S

The AirTAC SEJ Adjustable Cylinder SEJ63X125-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø63mm unit covers an effective stroke of 95–125mm without changing cylinders. Force is equal in both directions.

  • BoreØ63 mm
  • Nominal stroke125 mm
  • Adjust window30 mm
  • Effective stroke95–125 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$123.26 $130.76Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ63 stroke, mounting and version on one page All SEJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ63X125-30S

The AirTAC SEJ63X125-30S is a double-acting, double-rod ISO 15552 profile cylinder with a 63mm bore and a 125mm nominal stroke. A rod exits both ends, yielding identical annular areas so output force is equal in both directions at 1402 N each way at 0.5 MPa. The retract end features a mechanical stop screw allowing you to dial in the stroke up to 30mm, providing an effective stroke range of 95-125mm for precise machine commissioning.

This extruded aluminum barrel profile cylinder includes a -S magnet for CMSE reed and DMSE electronic sensors. It features field-adjustable air cushions at both ends to manage deceleration near stroke limits. The PT3/8 port and M16x1.5 rod thread handle speeds of 30-800 mm/s. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac SEJ Adjustable Cylinder SEJ63X125-30S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ63X125-30S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ63 mm
Nominal stroke125 mm
Adjustment window30 mm (95–125 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressureForce (both directions)
0.5 MPa1402 N
0.7 MPa1962 N
Max (@1.0 MPa)286 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ63X125-30S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
63Bore size in mm.
×125Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ63X125-30S Is Used

settings

Packaging Stop Fine-Tune

Dial in the 95-125mm retract stop to precisely match carton sealing jaws, leveraging the 1402 N at 0.5 MPa both ways for consistent pressure.

swap_horiz

Part Height Changeover

Adjust the rear rod 30mm on the fly to accommodate varying product heights on a conveyor without swapping out cylinder hardware.

Is the Airtac SEJ Adjustable Cylinder SEJ63X125-30S the Right Cylinder?

If your application requires less force, step down to the 50mm bore which provides 1154 N at 0.7 MPa; for heavier loads, step up to the 80mm bore offering 3175 N. If you do not need variable end-positioning, a fixed-stroke SED cylinder is sufficient. For fail-safe position holding on air loss, this cylinder requires an external rod lock like BSED, as the stop screw only sets the mechanical end and does not brake. When replacing an ISO 15552 unit, match the 125mm stroke, 30mm window, PT3/8 port, and magnet options.

AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ63X125-30S FAQ

A stop screw on the back rod mechanically shortens the retract stroke over a 30mm window. You can set the effective stroke anywhere from 95mm to 125mm, then lock it after dialing in the exact end position.

Because the rod exits both ends, force is equal in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ63X125-30S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ63X125-30S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.