
The AirTAC SEJ Adjustable Cylinder SEJ63X300-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø63mm unit covers an effective stroke of 200–300mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X300-100S is a double-acting, double-rod ISO 15552 profile cylinder with a 100mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so thrust is equal in both directions at 1402 N each way at 0.5 MPa. You can dial the retract end from 200mm up to the full 300mm nominal stroke.
A stop screw on the back rod mechanically sets the end position, which you lock down after fine-tuning. The -S magnet supports CMSE reed and DMSE electronic sensors for position feedback. The extruded aluminum barrel omits external tie rods, and adjustable air cushions at both ends decelerate the load near stroke end without acting as a fail-safe brake.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X300-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 300 mm |
| Adjustment window | 100 mm (200–300 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×300 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 100mm retract window to match varying cardboard thicknesses precisely, using the 1402 N both-way force to fold flaps without crushing the packaging.
Fine-tune the pressing depth of bearings during commissioning.
Adjust the mechanical stop position for different pallet heights on a conveyor line. The 100mm window lets you switch product sizes without changing cylinder hardware.
This 63mm bore delivers 1402 N both ways at 0.5 MPa and 1962 N at 0.7 MPa. If your load is lighter, step down to the 50mm bore for 825 N both ways at 0.5 MPa; if you need more force, step up to the 80mm bore for 2268 N at 0.5 MPa. If your application never requires end-position adjustment, a fixed-stroke SED cylinder provides the same double-rod action more compactly. Because the stroke is 300mm, use external guides to prevent side-loading damage to the seals. The cylinder does not hold position on air loss; use a BSED or external rod lock for fail-safe holding. Ensure your ISO 15552 replacement matches the PT3/8 port, 100mm adjust window, and TC or FA mount.
AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke within a 100mm window. The effective stroke range is 200mm to 300mm, which you lock in place after setting the exact end position.
Because the rod exits both ends, force is equal in both directions. It generates 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.