verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ63X300-20S

The AirTAC SEJ Adjustable Cylinder SEJ63X300-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø63mm unit covers an effective stroke of 280–300mm without changing cylinders. Force is equal in both directions.

  • BoreØ63 mm
  • Nominal stroke300 mm
  • Adjust window20 mm
  • Effective stroke280–300 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$156.09 $163.59Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ63 stroke, mounting and version on one page All SEJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ63X300-20S

The AirTAC SEJ63X300-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window. A rod exits both ends, meaning the effective retract stroke dials in from 280mm up to 300mm. Because the annulus area is symmetrical, you get equal force in both directions—1402N at 0.5 MPa and 1962N at 0.7 MPa.

A mechanical stop screw on the back rod lets you fine-tune the end position during machine commissioning. Once set, lock it down. The included -S magnet enables position sensing with CMSE reed or DMSE electronic sensors. Adjustable air cushions at both ends decelerate the load near stroke end, but this is not a fail-safe lock.

Airtac SEJ Adjustable Cylinder SEJ63X300-20S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ63X300-20S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ63 mm
Nominal stroke300 mm
Adjustment window20 mm (280–300 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressureForce (both directions)
0.5 MPa1402 N
0.7 MPa1962 N
Max (@1.0 MPa)286 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ63X300-20S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
63Bore size in mm.
×300Nominal stroke length in mm.
-20Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ63X300-20S Is Used

precision_manufacturing

Press Tooling Dial-In

Delivers 1962N of equal both-way force to seat press dies, using the 20mm retract window to perfectly dial in the 300mm end position without shims.

swap_horiz

Variable Part Changeover

Adjust the retract stroke from 280 to 300mm to accommodate different workpiece heights on a machining line, locking the back-rod stop for repeatable positioning.

conveyor_belt

Flighted Conveyor Indexing

Provides 1402N at 0.5 MPa for indexing flighted conveyor stops, using the dual-rod symmetry to maintain balanced velocity on the extend and retract strokes.

Is the Airtac SEJ Adjustable Cylinder SEJ63X300-20S the Right Cylinder?

This 63mm bore provides 1402N both-way force at 0.5 MPa. If your load is lighter, step down to the 50mm bore (825N both ways); for heavier pushing, step up to the 80mm bore (2268N both ways). The 20mm adjustment window is ideal for matching variable stops or changeovers, but if your end position never moves, a fixed-stroke SED saves complexity. For fail-safe holding on air loss, use an external rod lock. With a 300mm stroke, ensure external guides support side loads to protect the M16x1.5 rod threads.

AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (20mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 20mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ63X300-20S FAQ

A stop screw on the rear rod mechanically shortens the retract stroke. For this model, you can dial the end position up to 20mm, giving an effective stroke range of 280mm to 300mm.

As a double-rod cylinder, force is equal both ways: 1402N at 0.5 MPa, 1962N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa. It is dimensionally interchangeable per ISO 15552 with a PT3/8 port.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ63X300-20S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ63X300-20S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.