verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ63X350-50S

The AirTAC SEJ Adjustable Cylinder SEJ63X350-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø63mm unit covers an effective stroke of 300–350mm without changing cylinders. Force is equal in both directions.

  • BoreØ63 mm
  • Nominal stroke350 mm
  • Adjust window50 mm
  • Effective stroke300–350 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$165.86 $173.36Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ63 stroke, mounting and version on one page All SEJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ63X350-50S

The AirTAC SEJ63X350-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50mm adjustable stroke window, allowing you to dial the retract end from 300mm up to 350mm. A rod exits both ends, ensuring the annulus area remains identical for equal force and speed in both directions.

A stop screw on the back rod mechanically sets the retract end-position, which you lock after fine-tuning to match a machine stop precisely. The extruded aluminum barrel carries no external tie rods, and adjustable air cushions at both ends decelerate the 20mm rod near stroke ends. Note the overall length is longer than a fixed-stroke SED, and the PT3/8 port matches the 63mm bore standard.

Airtac SEJ Adjustable Cylinder SEJ63X350-50S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ63X350-50S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ63 mm
Nominal stroke350 mm
Adjustment window50 mm (300–350 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressureForce (both directions)
0.5 MPa1402 N
0.7 MPa1962 N
Max (@1.0 MPa)286 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ63X350-50S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
63Bore size in mm.
×350Nominal stroke length in mm.
-50Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ63X350-50S Is Used

precision_manufacturing

Press Fit Commissioning

Dial in the exact 300-350mm insertion depth for a 1402N press fit at 0.5MPa, locking the stop screw once the optimal mechanical end is found during machine setup.

swap_horiz

Variable-Stop Changeover

Handle different part heights on a machining line by adjusting the retract position up to 50mm, utilizing the equal 1962N both-way force at 0.7MPa for consistent clamping.

tune

Trial Positioning Jig

Fine-tune end stops on a testing jig without swapping hardware, using the double-rod design to maintain identical extend and retract speeds while probing part tolerances.

Is the Airtac SEJ Adjustable Cylinder SEJ63X350-50S the Right Cylinder?

This 63mm bore delivers 1402 N both ways at 0.5 MPa (1962 N at 0.7 MPa). If you need less clamping force, step down to the 50mm bore providing 825 N each way; if your load requires more thrust, step up to the 80mm bore yielding 2268 N both ways. Confirm the 50mm adjustment window covers your required end-position range. If your application never requires stroke changes, a fixed-stroke SED saves space. For stroke lengths of 350mm, external guides are recommended to prevent rod side-loading and extend bearing life.

When replacing an ISO 15552 cylinder, verify the 63mm bore, 350mm nominal stroke, 50mm window, PT3/8 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Remember that the adjustable cushion only decelerates the load near stroke end; a plain SEJ does not hold position on air loss. For fail-safe holding, specify a BSED or an external rod lock.

AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (50mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 50mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ63X350-50S FAQ

A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 50mm. The effective stroke range is 300-350mm. You dial in the exact end-position during commissioning and lock the screw to secure the mechanical stop.

Because it is a double-rod cylinder, force is equal in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ63X350-50S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ63X350-50S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.