
The AirTAC SE63 Standard Cylinder SE63X350 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 350mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X350 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 1559 N push force at 0.5 MPa (2182 N at 0.7 MPa) across a 350 mm stroke. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized ISO 15552 interface dimensions for universal hardware compatibility.
Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard mechanical stops during high-speed 30-800 mm/s cycling. This specific SKU lacks a built-in magnet, meaning it arrives without position-sensing capabilities out of the box.
| Model | Airtac SE63 Standard Cylinder SE63X350 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push at 0.5 MPa required to index heavy timber pallets laterally across a 350 mm span during high-speed packaging line sortation.
Uses the full 350 mm stroke to drive raw hex steel stock into the collet, relying on the extruded profile barrel for flush mounting to the lathe headstock.
Deploys the adjustable end cushions to gently decelerate the 20 mm rod during rapid 30-800 mm/s folding cycles on continuous corrugated box machinery.
When sizing this 63 mm bore actuator, evaluate your exact thrust margins: stepping down to the 50 mm bore drops your 0.5 MPa push to 982 N, while stepping up to the 80 mm bore increases it to 2513 N. Because this model features a 350 mm stroke, the 20 mm rod and its bearing face increased bending moments under side loads—always incorporate an external guide rail to prevent premature seal wear if the load is not perfectly axial.
As a standard double-acting cylinder, the SE63X350 cannot hold a load if air pressure is lost or the valve is centered; the piston will drift. If your application demands true mechanical holding power without live air, pivot to the AirTAC BSE series (which integrates a rod lock) or utilize an external pilot-operated check valve. For direct retrofits, this PT3/8 ported actuator shares standard mounting footprints with FA, LB, or TC accessories across all ISO 15552 compliant brands.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X350 generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum of 318 kgf at 1.0 MPa. It features a 20 mm rod, an M16x1.5 rod-end thread, and a PT3/8 port.
Yes, the SE63X350 is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it into existing FA, LB, or TC mounting hardware designed for other ISO 15552 profile cylinders without machining the frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.