
The AirTAC SEJ Adjustable Cylinder SEJ80X160-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø80mm unit covers an effective stroke of 140–160mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X160-20S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, delivering equal force in both directions at 2268 N each way at 0.5 MPa. The retract stroke is mechanically adjustable via a stop screw on the back rod over a 20 mm window, giving an effective stroke range of 140 to 160 mm.
Because the annulus area is identical on both sides, extend and retract speeds match perfectly. The extruded aluminum barrel has no external tie rods, and the -S magnet supports CMSE reed and DMSE electronic sensors for end-position feedback. Field-adjustable air cushions at both ends decelerate the load near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X160-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 160 mm |
| Adjustment window | 20 mm (140–160 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×160 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 140-160 mm retract position when fine-tuning press tooling, using the 2268 N both-way force to clamp parts securely.
Adjust the mechanical stop to match varying carton heights during format changeover, avoiding hardware swaps while handling 3175 N at 0.7 MPa.
Set a precise product stop position on a conveyor line, tweaking the end point by up to 20 mm during commissioning without replacing the cylinder.
Confirm the 20 mm adjustment window covers your required end-position range. If you need less force, the 63 mm bore delivers 1402 N at 0.5 MPa each way; if you need more, step up to the 100 mm bore for 3681 N at 0.5 MPa. For a fixed end position that never changes, a standard SED double-rod cylinder is sufficient. This cylinder does not hold position on air loss; the cushion and stop screw only set the mechanical end and decelerate near stroke end, so use an external rod lock for fail-safe holding. As an ISO 15552 cylinder, it dimensionally matches standard bore, stroke, port PT3/8, and mounting footprints.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 20 mm window. You can dial the effective stroke from 140 mm up to 160 mm, then lock it at the exact position needed for your machine.
Because it is a double-rod cylinder, the force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.