
The AirTAC SEJ Adjustable Cylinder SEJ80X160-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø80mm unit covers an effective stroke of 110–160mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X160-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This delivers an equal output force of 2268 N each way at 0.5 MPa, preventing speed discrepancies between extend and retract motions.
You can mechanically dial the retract end-position over a 50 mm range via a stop screw on the back rod, yielding an effective stroke of 110-160 mm. The included -S magnet supports CMSE reed and DMSE electronic sensors for position feedback. Field-adjustable air cushions at both ends decelerate the load near stroke completion.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X160-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 160 mm |
| Adjustment window | 50 mm (110–160 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×160 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 110-160 mm clamping position on stamping presses, utilizing the 3175 N both-way force at 0.7 MPa to secure sheet metal workpieces precisely.
Fine-tune the retract end-stop during packaging line changeovers to accommodate varying carton heights, locking the back-rod screw once the fold depth is set.
Adjust the stroke window on conveyor diverter arms to match different pallet widths, ensuring the equal both-way force smoothly redirects heavy loads without speed mismatch.
Verify the 50 mm adjustment window covers your positioning needs, allowing precise end-stop tuning from 110 to 160 mm without swapping hardware. If your process requires less force, the 63 mm bore provides 1402 N both ways at 0.5 MPa; for heavier demands, stepping up to the 100 mm bore yields 3681 N at 0.5 MPa. A fixed-stroke SED is sufficient if you never need to alter the retract position.
For ISO 15552 replacements, match the 80 mm bore, 160 mm nominal stroke, PT3/8 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2. Note that the air cushion and stop screw decelerate the load but do not hold position on air loss; use an external rod lock for fail-safe holding.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 50 mm window. You can dial the effective stroke from 110 mm up to the full 160 mm, then lock it in place for precise machine commissioning.
Because the rod exits both ends, force is identical in both directions. It generates 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.