Airtac TACE Guided Compact Cylinder TACE100X30S
The AirTAC Airtac TACE Guided Compact Cylinder TACE100X30S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø100mm bore and 30mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ100 mm
- Stroke30 mm
- Port size1/4"
- Acting typeDouble acting, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE100X30S
Double acting and non-rotating, the TACE100X30S packs a 100 mm bore and 30 mm stroke into an ISO 21287 compact body. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push rises to 5497.8 N, with a theoretical peak of 800.9 kgf at 1.0 MPa.
Plan real work at about 2356 N (0.6 of the push rating) at 0.5 MPa, which lifts roughly 200 kg vertically with a 2:1 margin. The hard-anodized aluminium body with S45C hard-chrome rod runs about 50% shorter in mounting length than an ISO 15552 profile cylinder, so it fits tight presses and gantries. The S code on this model means the magnet is fitted, so CMSE or DMSE switches can be mounted. Air is filtered to 40 um, pressure runs 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and a fixed TPU bumper sits at both ends.
Airtac TACE Guided Compact Cylinder TACE100X30S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE100X30S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 30 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE100X30S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 100 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE100X30S Is Used
Bearing clinch press
A 30 mm strike is enough to press a bearing into a gearbox housing on an automotive assembly line, and the twin-guide yoke keeps the ram square to the bore without extra tooling guides.
CNC fixture clamping
Mounted on a machining centre table, the 3927 N push at 0.5 MPa clamps heavy aluminium castings, while the short body clears the fixture guards where a longer cylinder would foul.
Palletizer push-off
At the end of a palletizing conveyor, the cylinder ejects full cartons sideways; the fitted magnet with a DMSE switch confirms each stroke before the layer pattern advances.
Is the Airtac TACE Guided Compact Cylinder TACE100X30S the Right Cylinder?
At 3927 N push at 0.5 MPa this is the top of the ACE range; if your load needs less, the 80 mm bore still delivers 2513.3 N at the same pressure. There is no larger ACE bore, so step up to a different series for more force. Remember the piston drifts when air is lost - for a held load add a rod lock or pilot check valve. Mounting options are FB flange, CA/CB clevis, CR or FTC, and because the S magnet is fitted on this model you can add CMSE / DMSE switches for end-of-stroke sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE100X30S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N. At 0.7 MPa push reaches 5497.8 N and pull 5277.9 N. The theoretical maximum is 800.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with speed from 30-500 mm/s, and for sizing real work plan on roughly 2356 N of usable push at 0.5 MPa.
The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy. The rod ends in a female M12x1.75 thread and the port is 1/4" PT. Mount with an FB flange, CA/CB clevis, CR or FTC. Because this model carries the optional -S magnet, CMSE / DMSE reed or solid-state switches can be mounted directly on the body slots.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE100X30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.