Airtac TACE Guided Compact Cylinder TACE100X80
The AirTAC Airtac TACE Guided Compact Cylinder TACE100X80 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø100mm bore and 80mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ100 mm
- Stroke80 mm
- Port size1/4"
- Acting typeDouble acting, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE100X80
Double acting and non-rotating, the AirTAC TACE100X80 pairs a 100 mm bore with an 80 mm stroke inside an ISO 21287 compact body. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa those figures rise to 5497.8 N push and 5277.9 N pull, with a theoretical peak of 800.9 kgf at 1.0 MPa. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a heavy plate or gripper stays square without any external guide.
The hard-anodized aluminium body with an S45C hard-chrome plated 20 mm rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters in wide presses and gantries where every millimetre of envelope counts. Plan for roughly 2356 N of real work at 0.5 MPa (about 0.6 of the push force), enough to lift about 200 kg vertically with a 2:1 margin. Air supply is 0.15-1.0 MPa (22-145 psi), speed runs 30-500 mm/s, and a fixed TPU bumper at both ends absorbs end-of-stroke energy. The magnet is optional: order the -S code to enable CMSE / DMSE switches.
Airtac TACE Guided Compact Cylinder TACE100X80 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE100X80 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE100X80
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE100X80 Is Used
Press and clinch station
Riveting or clinching battery tray brackets on an automotive assembly line, where the 3927 N push at 0.5 MPa leaves ample headroom and the twin-guide yoke keeps the punch square to the hole.
Gantry lift for castings
Vertical handling of aluminium die-cast housings up to about 200 kg on a machine-tending gantry, using the 2:1 margin on the roughly 400 kgf theoretical lift of the 100 mm bore.
Heavy gate and stopper duty
Driving sliding guard gates or index stoppers on a pallet conveyor, where the short ISO 21287 body fits between guard rails and the 80 mm stroke covers the full lock travel.
Is the Airtac TACE Guided Compact Cylinder TACE100X80 the Right Cylinder?
At 3927 N push at 0.5 MPa this 100 mm bore sits at the top of the ACE range; if your load needs under 2513.3 N, the 80 mm bore TACE80X80 handles the same job in a smaller envelope. The piston drifts when air is lost, so add a rod lock or pilot check valve wherever a held load must not move. Mount with an FB flange, CA/CB clevis, CR or FTC feet, and specify the optional -S magnet if CMSE / DMSE position switches are planned. The rod end is a female M12x1.75 thread and the port is 1/4" PT.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE100X80 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push is 5497.8 N and pull is 5277.9 N. The theoretical maximum is 800.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, speed runs 30-500 mm/s, and the working medium is air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy. Mounting options are FB flange, CA/CB clevis, CR and FTC. CMSE or DMSE switches work only when you order the optional -S magnet; the standard TACE100X80 carries no magnet. Note that the piston drifts when air is lost, so use a rod lock or pilot check valve to hold a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE100X80
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.