Airtac TACE Guided Compact Cylinder TACE20X70S
The AirTAC Airtac TACE Guided Compact Cylinder TACE20X70S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø20mm bore and 70mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ20 mm
- Stroke70 mm
- Port sizeM5×0.8
- Acting typeDouble acting, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE20X70S
A double acting compact cylinder built to the ISO 21287 short body, the TACE20X70S pairs a 20 mm bore with a 70 mm stroke and twin guide rods on a yoke that stop the tooling rotating and carry side load. At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa those figures rise to 219.9 N and 164.9 N. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs, guards and gantries where a full-length body will not fit.
For real work, plan on roughly 94 N of usable push at 0.5 MPa (about 60% of the rating), which corresponds to lifting about 8 kg vertically with a 2:1 margin. The hard-anodized aluminium body carries a hard-chrome S45C rod, a fixed TPU bumper absorbs end-of-stroke energy at both ends, and the fitted -S magnet accepts CMSE / DMSE switches for position feedback. Air supply is 0.15-1.0 MPa (22-145 psi) filtered to 40 um, with speed from 30-500 mm/s.
Airtac TACE Guided Compact Cylinder TACE20X70S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE20X70S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø20 mm |
| Stroke | 70 mm |
| Acting type | Double acting, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 118 N |
| 0.7 MPa | 220 N | 165 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE20X70S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 20 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE20X70S Is Used
Gripper actuation on electronics assembly cells
The twin-guide yoke keeps a small gripper square over its 70 mm travel while lifting connector housings of up to about 8 kg vertically, with no external guide required.
Snap-fit pressing of sensor housings
About 94 N of usable push at 0.5 MPa is enough to seat O-rings and press caps in automotive sub-assembly benches, while the TPU bumper softens each end of stroke.
Vial tray indexing in lab automation
A 70 mm stroke indexes a row of sample vials between assay stations, and the fitted -S magnet drives CMSE switches to confirm each position before the next step.
Is the Airtac TACE Guided Compact Cylinder TACE20X70S the Right Cylinder?
Sizing down, bore 16 pushes 100.5 N at 0.5 MPa; sizing up, bore 25 reaches 245.4 N. The 70 mm stroke sits inside the 100 mm standard range for bore 20, so it is a catalogue item with a female M6x1.0 rod thread and M5x0.8 ports. The piston drifts if air is lost - it is not a lock, so add a rod lock or pilot check valve where a load must stay put. FB flange, CA/CB clevis, CR and FTC mountings suit the yoke body, and the fitted -S magnet is ready for CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE20X70S FAQ
At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa push is 219.9 N and pull is 164.9 N. The theoretical maximum at 1.0 MPa is 32 kgf. Working pressure spans 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof limit, and speed runs 30-500 mm/s.
It is an ISO 21287 compact cylinder whose hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder. A fixed TPU bumper at each end absorbs end-of-stroke energy, mounting options include FB, CA, CB, CR and FTC, and because this model carries the -S magnet you can fit CMSE or DMSE switches directly on the body slots.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE20X70S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.