Airtac TACE Guided Compact Cylinder TACE20X75
The AirTAC Airtac TACE Guided Compact Cylinder TACE20X75 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø20mm bore and 75mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ20 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE20X75
The AirTAC TACE20X75 is a double acting, non-rotating compact cylinder built to ISO 21287: a 20 mm bore with a 75 mm stroke in a hard-anodized aluminium body that saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight jigs, guards and gantries. Twin guide rods on a yoke stop the tooling rotating and carry side load, keeping a gripper or plate square without an external guide. At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa those figures rise to 219.9 N and 164.9 N.
Plan on roughly 94 N of usable push at 0.5 MPa (about 0.6 of the rated force), which lifts about 8 kg vertically with a 2:1 margin - enough to match a real part weight before you order. A fixed TPU bumper at both ends absorbs end-of-stroke energy, and the 10 mm rod carries a female M6x1.0 thread. The magnet is optional: only the -S code enables CMSE / DMSE switches. Operating range is 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s, with a 1.5 MPa (215 psi) proof pressure.
Airtac TACE Guided Compact Cylinder TACE20X75 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE20X75 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø20 mm |
| Stroke | 75 mm |
| Acting type | Double acting, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 118 N |
| 0.7 MPa | 220 N | 165 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE20X75
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 20 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE20X75 Is Used
Electronics pick-and-place
On an SMT assembly line, the twin-guide yoke keeps a vacuum plate square over 75 mm of travel while the 157.1 N push seats small PCB carriers into test nests.
Connector press-fit fixture
A bench fixture pressing M12 connectors into plastic housings uses the 94 N usable push at 0.5 MPa, with the short ISO 21287 body fitting inside a guarding frame.
Carton diverting gate
A packaging line gate extends and retracts over 75 mm at up to 500 mm/s, and the twin guide rods stop the gate plate twisting under side load.
Is the Airtac TACE Guided Compact Cylinder TACE20X75 the Right Cylinder?
For a 75 mm stroke in this force class, step down to a 16 mm bore (100.5 N push at 0.5 MPa) if the load is lighter, or up to a 25 mm bore (245.4 N push) when you need more muscle. The piston does not hold position when air is lost - it drifts - so add a rod lock or pilot check valve for a held load. Mount with FB flange, CA/CB clevis, CR or FTC, and order the optional -S magnet if CMSE / DMSE switches must track position in the body slots.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE20X75 FAQ
At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa it pushes 219.9 N and pulls 164.9 N. The theoretical maximum is 32 kgf at 1.0 MPa. In practice, plan on about 94 N of usable push at 0.5 MPa, roughly 8 kg of vertical lift with a 2:1 margin.
The ISO 21287 short body is hard-anodized aluminium with an S45C hard-chrome rod, a fixed TPU bumper at each end, and mounting choices of FB flange, CA/CB clevis, CR or FTC. The magnet is optional: order the -S code to run CMSE or DMSE switches in the body slots; without -S there is no magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE20X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.