Airtac TACE Guided Compact Cylinder TACE25X35
The AirTAC Airtac TACE Guided Compact Cylinder TACE25X35 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø25mm bore and 35mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ25 mm
- Stroke35 mm
- Port sizeM5×0.8
- Acting typeDouble acting, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE25X35
The AirTAC TACE25X35 is a double acting, non-rotating compact cylinder built to ISO 21287: a 25 mm bore and 35 mm stroke in a hard-anodized aluminium body with a hard-chrome plated 10 mm S45C rod. At 0.5 MPa it pushes 245.4 N and pulls 206.2 N; at 0.7 MPa those figures rise to 343.6 N and 288.6 N, with a theoretical peak of 50.1 kgf at 1.0 MPa. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper jaw or clamp plate stays square without an external guide.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight jigs, guards and gantry frames. Plan on roughly 147 N of usable push at 0.5 MPa - about 15 kgf of real work - and expect about 12 kg of vertical lift once a 2:1 margin is applied. Filtered air (40 um) drives the piston from 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s between -20 and +70 C, with a fixed TPU bumper at each end, an M5x0.8 PT port and a female M6x1.0 rod thread.
Airtac TACE Guided Compact Cylinder TACE25X35 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE25X35 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 35 mm |
| Acting type | Double acting, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE25X35
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 25 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE25X35 Is Used
Connector gripper in an electronics assembly cell
Twin guide rods keep the gripper jaws from twisting as they close on small PCB connectors, and the 35 mm stroke suits the shallow jaw opening of a benchtop pick-and-place head.
Jig clamp on a small CNC drilling fixture
The roughly 147 N of usable push at 0.5 MPa holds an aluminium bracket flat during drilling, while the short body tucks under the fixture plate where a full-length cylinder will not fit.
Reject pusher on a blister packaging line
A 35 mm kick is enough to sweep an off-spec blister off the conveyor into the reject bin, and the non-rotating yoke keeps the pusher pad square to the product lane.
Is the Airtac TACE Guided Compact Cylinder TACE25X35 the Right Cylinder?
The 25 mm bore sits between the 20 mm size (157.1 N push at 0.5 MPa) and the 32 mm size (402.1 N push at 0.5 MPa): stay at 25 mm if about 147 N of working force covers the load, step up to 32 mm when it does not. Note that the rod drifts as soon as air is lost - it never holds or brakes a load - so fit a rod lock or pilot check valve wherever a part must stay put. Mount via FB flange, CA/CB clevis, CR or FTC. This version ships without a magnet; order the -S code if CMSE / DMSE switching is planned.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE25X35 FAQ
At 0.5 MPa it pushes 245.4 N and pulls 206.2 N; at 0.7 MPa it pushes 343.6 N and pulls 288.6 N. The theoretical maximum is 50.1 kgf at 1.0 MPa. The bore is 25 mm, the stroke 35 mm, the rod 10 mm with a female M6x1.0 thread, and the air port is M5x0.8 (PT).
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke shock. Mounting choices are FB, CA, CB, CR and FTC. Position sensing requires the optional -S magnet code; with -S fitted, CMSE or DMSE switches can ride the body slots. Operating envelope: 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, -20 to +70 C.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE25X35
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.