Airtac TACE Guided Compact Cylinder TACE25X45
The AirTAC Airtac TACE Guided Compact Cylinder TACE25X45 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø25mm bore and 45mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ25 mm
- Stroke45 mm
- Port sizeM5×0.8
- Acting typeDouble acting, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE25X45
The TACE25X45 is a double acting, non-rotating compact cylinder built to ISO 21287: a 25 mm bore pushing 245.4 N (pull 206.2 N) at 0.5 MPa, rising to 343.6 N at 0.7 MPa, with a theoretical peak of 50.1 kgf at 1.0 MPa. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or plate stays square without an external guide - a real edge over a plain compact cylinder.
The hard-anodized aluminium body with an S45C hard-chrome plated 10 mm rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs, guards and gantries. Plan for about 147 N of real work at 0.5 MPa; that is roughly a 12.5 kg vertical lift with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the optional -S magnet enables CMSE / DMSE switches.
Airtac TACE Guided Compact Cylinder TACE25X45 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE25X45 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 45 mm |
| Acting type | Double acting, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE25X45
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 25 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE25X45 Is Used
PCB tray transfer on a test gantry
The 45 mm stroke shuttles trays between test fixtures, and the twin-guide yoke keeps the vacuum plate square under 245.4 N of push at 0.5 MPa.
Carton flap clamping on a sealer
Two TACE25X45 units press flaps closed at 343.6 N each at 0.7 MPa while the short body fits inside the sealing head frame.
Reagent plate indexing in lab automation
The 25 mm bore indexes microplates 45 mm per step at up to 500 mm/s, and the optional -S magnet with a DMSE switch confirms each position.
Is the Airtac TACE Guided Compact Cylinder TACE25X45 the Right Cylinder?
For this 45 mm stroke, size up or down by force: a 20 mm bore gives 157.1 N push at 0.5 MPa, while a 32 mm bore reaches 402.1 N - the 25 mm sits between at 245.4 N. Remember the piston drifts if air is lost; for a held load add a rod lock or pilot check valve. Mount with FB flange, CA/CB clevis, CR or FTC, and order the -S code if CMSE / DMSE sensing is planned.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE25X45 FAQ
At 0.5 MPa it pushes 245.4 N and pulls 206.2 N; at 0.7 MPa push rises to 343.6 N with pull at 288.6 N. The theoretical maximum at 1.0 MPa is 50.1 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and speed 30-500 mm/s.
It is an ISO 21287 compact cylinder - the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. A fixed TPU bumper at each end absorbs end-of-stroke energy. Mounting options include FB flange, CA/CB clevis, CR and FTC. Sensing needs the optional -S magnet ordered with the model code; with -S fitted, CMSE / DMSE switches can be mounted, but without -S no magnet is present.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE25X45
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.