Airtac TACE Guided Compact Cylinder TACE25X75
The AirTAC Airtac TACE Guided Compact Cylinder TACE25X75 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø25mm bore and 75mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ25 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE25X75
The TACE25X75 is a double acting, non-rotating compact cylinder built to ISO 21287: a 25 mm bore with a 75 mm stroke, twin guide rods on a yoke, and a hard-anodized aluminium body around an S45C hard-chrome plated 10 mm rod. At 0.5 MPa it pushes 245.4 N and pulls 206.2 N; at 0.7 MPa those figures rise to 343.6 N and 288.6 N, with a theoretical peak of 50.1 kgf at 1.0 MPa. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits inside tight jigs, guards and gantry frames where a full-length cylinder will not.
In practice, plan for about 147 N of real work at 0.5 MPa - roughly 60% of the push rating - which lifts about 25 kg vertically, or 12 kg with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the twin-guide yoke keeps a gripper or clamp plate square without an external guide. The magnet is optional: order the -S code to enable CMSE / DMSE switches. Air filtered to 40 um, pressure 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C.
Airtac TACE Guided Compact Cylinder TACE25X75 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE25X75 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE25X75
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE25X75 Is Used
Gripper actuation on assembly cells
Twin guide rods stop a pneumatic gripper rotating as it picks machined housings off a conveyor; the 75 mm stroke handles parts up to about 12 kg with a 2:1 lift margin.
Part ejection from machining fixtures
About 147 N of usable push at 0.5 MPa slides a finished bracket off its locating pin after the cut, and the short ISO 21287 body tucks inside the fixture footprint.
Clamping in drilling jigs
The yoke carries side load so the clamp plate stays square over the full 75 mm stroke; FB or CB mounting bolts the cylinder straight to the jig base.
Is the Airtac TACE Guided Compact Cylinder TACE25X75 the Right Cylinder?
For this stroke range, a TACE16X75 of the same length pushes only 100.5 N at 0.5 MPa, while stepping up to a TACE32X75 gives 402.1 N - so the 25 mm bore suits parts in the 10-15 kg lift class. Remember the piston drifts when air is lost: it holds nothing on its own, so add a rod lock or pilot check valve if the load must stay put. Mount with FB flange, CA/CB clevis, CR or FTC; the rod end is a female M6x1.0 thread and the ports are PT, M5x0.8. If you need end-of-stroke signalling, specify the -S magnet variant at order time - without it no CMSE / DMSE switch can be fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE25X75 FAQ
At 0.5 MPa it pushes 245.4 N and pulls 206.2 N; at 0.7 MPa push is 343.6 N and pull is 288.6 N. The theoretical maximum is 50.1 kgf at 1.0 MPa. For sizing, treat about 147 N - roughly 60% of the 0.5 MPa push figure - as the practical working force, which lifts about 25 kg vertically or 12 kg with a 2:1 margin.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end absorbing end-of-stroke energy. Sensors are possible only on the -S magnet variant: order TACE25X75S to run CMSE / DMSE switches, since without -S no magnet is fitted. Mounting options are FB, CA, CB, CR and FTC, with a female M6x1.0 rod thread and M5x0.8 PT ports.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE25X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.