Airtac TACE Guided Compact Cylinder TACE40X35
The AirTAC Airtac TACE Guided Compact Cylinder TACE40X35 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø40mm bore and 35mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ40 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE40X35
The TACE40X35 is a double acting, non-rotating compact cylinder built to ISO 21287: a 40 mm bore with a 12 mm hard-chrome-plated S45C rod, a hard-anodized aluminium body, and twin guide rods on a yoke that stop the tooling rotating and carry side load. At 0.5 MPa it pushes 628.3 N and pulls 571.8 N; at 0.7 MPa those figures rise to 879.6 N and 800.5 N, with a theoretical peak of 128.1 kgf at 1.0 MPa. Supply air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, and a fixed TPU bumper at both ends absorbs end-of-stroke shock.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 35 mm stroke drops into tight jigs, guards and gantry pockets a full-length cylinder cannot reach. For day-to-day sizing, plan on roughly 377 N of usable push at 0.5 MPa, which lifts about 32 kg vertically with a 2:1 margin. The rod ends in a female M8x1.25 thread, the air port is 1/8" PT, and the optional -S magnet code enables CMSE / DMSE switches - without that code no sensor can be mounted.
Airtac TACE Guided Compact Cylinder TACE40X35 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE40X35 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø40 mm |
| Stroke | 35 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 572 N |
| 0.7 MPa | 880 N | 800 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE40X35
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 40 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE40X35 Is Used
Bearing press station
Pressing small bearings and bushings into pump or gearbox housings on a light assembly press. The 628.3 N push at 0.5 MPa suits typical press fits, and the 35 mm stroke matches short part-to-part travel in a compact cell.
Carton reject pusher
Kicking rejected cartons or trays sideways off a packaging conveyor lane. Twin guide rods keep the pusher plate square against the load, and the short body mounts between guard rails where a profile cylinder will not fit.
CNC jig clamp
Clamping aluminium brackets on a machining fixture. The non-rotating yoke holds the clamp pad flat without an external guide, and roughly 377 N of usable force at 0.5 MPa is ample for light machining clamps.
Is the Airtac TACE Guided Compact Cylinder TACE40X35 the Right Cylinder?
This 40 mm bore sits between the 25 mm (245.4 N push at 0.5 MPa) and the 50 mm (981.7 N push at 0.5 MPa), so pick it when a light-duty bore stalls but a 50 mm wastes space and air. Remember the piston drifts when air is lost - it never locks or holds a load - so add a rod lock or pilot check valve if the workpiece must stay put. Stroke 35 mm is well inside the 200 mm standard range for this bore; mounting choices are FB flange, CA/CB clevis, CR and FTC, and order the -S code only if CMSE / DMSE switching is needed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE40X35 FAQ
At 0.5 MPa it pushes 628.3 N and pulls 571.8 N; at 0.7 MPa it pushes 879.6 N and pulls 800.5 N. The theoretical maximum is 128.1 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and speed runs 30-500 mm/s. For real work, size on about 377 N of push at 0.5 MPa, enough to lift about 32 kg vertically with a 2:1 margin.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke shock. Mounting options are FB flange, CA/CB clevis, CR and FTC, with a female M8x1.25 rod thread and a 1/8" PT port. Sensors work only with the optional -S magnet code, which allows CMSE / DMSE switches; without -S the cylinder has no magnet, so no sensor can be fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE40X35
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.