Airtac TACE Guided Compact Cylinder TACE40X75S
The AirTAC Airtac TACE Guided Compact Cylinder TACE40X75S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø40mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ40 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE40X75S
Built as a double acting, non-rotating ISO 21287 compact cylinder, the TACE40X75S pairs a 40 mm bore with a 75 mm stroke, pushing 628.3 N (571.8 N on retraction) at 0.5 MPa through a 12 mm hard-chrome-plated S45C rod. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or plate stays square without an external guide, and fixed TPU bumpers at both ends absorb end-of-stroke energy. The rod ends in a female M8x1.25 thread.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs, guards and gantries where a full-length cylinder will not. Air runs 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s through 1/8" ports on the hard-anodized aluminium body. This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be mounted for end-of-stroke signals. Plan on roughly 377 N of usable push at 0.5 MPa; with a 2:1 margin that lifts about 32 kg vertically.
Airtac TACE Guided Compact Cylinder TACE40X75S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE40X75S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 572 N |
| 0.7 MPa | 880 N | 800 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE40X75S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE40X75S Is Used
CNC jig clamping
Clamps aluminum gearbox housings in a machining fixture, where the 75 mm stroke clears the loader arm and 628.3 N of push holds the part square through milling.
Pick-and-place grippers
Drives a twin-gripper head transferring die-cast covers between pallets; the twin guide yoke keeps the grippers from rotating without extra rails.
Mold ejection on a packaging line
Ejects formed plastic caps from a mold nest, using about 879.6 N at 0.7 MPa to break parts free of the cavity at up to 500 mm/s.
Is the Airtac TACE Guided Compact Cylinder TACE40X75S the Right Cylinder?
At 628.3 N push at 0.5 MPa, this 40 mm bore sits between the 32 mm size (402.1 N) and the 50 mm size (981.7 N); step down for lighter clamps, up for heavier lifts. The piston drifts if air is lost, so fit a rod lock or pilot check valve where a load must stay held. Mounting choices are FB flange, CA/CB clevis, CR and FTC, and because the -S magnet is fitted on this model, CMSE / DMSE switches can be added at either end of the body.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE40X75S FAQ
At 0.5 MPa it pushes 628.3 N and pulls 571.8 N; at 0.7 MPa those rise to 879.6 N push and 800.5 N pull. The theoretical maximum at 1.0 MPa is 128.1 kgf. Air supply is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, with a fixed TPU bumper at each end.
The ISO 21287 short body cuts mounting length by about 50% versus an ISO 15552 profile cylinder, with 1/8" ports on the 40 mm bore body and FB, CA/CB, CR or FTC mounting. Because the -S magnet is fitted on this model, CMSE or DMSE reed or solid-state switches can be clipped into the body slots to signal end of stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE40X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.