Airtac TACE Guided Compact Cylinder TACE40X90S
The AirTAC Airtac TACE Guided Compact Cylinder TACE40X90S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø40mm bore and 90mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ40 mm
- Stroke90 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE40X90S
Built as a double acting, non-rotating compact cylinder, the AirTAC TACE40X90S pairs a 40 mm bore with a 90 mm stroke in an ISO 21287 body. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or plate stays square without an external guide. At 0.5 MPa it pushes 628.3 N and pulls 571.8 N; at 0.7 MPa those figures rise to 879.6 N and 800.5 N. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is what lets it fit tight jigs, guards and gantries.
For real-world sizing, plan on roughly 377 N of usable force at 0.5 MPa (about 0.6 of the push rating), and expect the rod to lift about 32 kg vertically with a 2:1 margin. The hard-anodized aluminium body runs an S45C hard-chrome plated rod, a fixed TPU bumper at each end absorbs end-of-stroke energy, and the fitted -S magnet accepts CMSE or DMSE switches for position feedback. The rod end carries a female M8x1.25 thread and air ports are 1/8" PT. Speed spans 30-500 mm/s across 0.15-1.0 MPa (22-145 psi).
Airtac TACE Guided Compact Cylinder TACE40X90S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE40X90S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø40 mm |
| Stroke | 90 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 572 N |
| 0.7 MPa | 880 N | 800 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE40X90S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE40X90S Is Used
Automotive bracket transfer
A 90 mm stroke reaches across a pallet of steel brackets; 628.3 N of push at 0.5 MPa seats each part into its nest while the twin-guide yoke keeps the gripper facing square.
Bearing staking press
About 377 N of usable force at 0.5 MPa stakes small bushings into pump housings, and the compact body slots into a press frame where a full-length cylinder will not fit.
Vertical lift on a packaging line
The rod lifts about 32 kg vertically with a 2:1 margin - filled cartons or a small fixture plate - and the fitted -S magnet feeds CMSE switch signals back to the PLC.
Is the Airtac TACE Guided Compact Cylinder TACE40X90S the Right Cylinder?
If 628.3 N of push at 0.5 MPa is more than the job needs, the bore 32 TACE delivers 402.1 N; if the load is heavier, step up to bore 50 for 981.7 N. Keep in mind the piston drifts when air is lost, so for a held load add a rod lock or pilot check valve downstream. FB flange, CA/CB clevis, CR and FTC mountings all suit this bore, and because this model already carries the -S magnet, CMSE or DMSE switches can be clipped straight into the body slots without reordering.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE40X90S FAQ
At 0.5 MPa it pushes 628.3 N and pulls 571.8 N. At 0.7 MPa push rises to 879.6 N and pull to 800.5 N. The theoretical maximum at 1.0 MPa is 128.1 kgf. Operating pressure spans 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof limit, on air filtered to 40 um.
The ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy. This model carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches mount directly in the body slots. Note the piston drifts if air is lost - fit a rod lock or pilot check valve where a load must stay held.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE40X90S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.