Airtac TACE Guided Compact Cylinder TACE50X10S
The AirTAC Airtac TACE Guided Compact Cylinder TACE50X10S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø50mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ50 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE50X10S
The TACE50X10S is a double acting, non-rotating compact cylinder built to ISO 21287: a 50 mm bore in a short hard-anodized aluminium body that saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it drops into tight jigs and guarded gantries where a full-length body will not fit. Twin guide rods on a yoke stop the tooling rotating and carry side load, keeping a gripper or clamp plate square without an external guide.
At 0.5 MPa it pushes 981.7 N and pulls 881.2 N; at 0.7 MPa those figures rise to 1374.4 N and 1233.7 N, with a theoretical peak of 200.2 kgf at 1.0 MPa. Plan on about 589 N of usable push at 0.5 MPa, which lifts roughly 50 kg vertically with a 2:1 margin. The 10 mm stroke suits short clamp and eject moves, the 1/8" PT port feeds both chambers, and the fitted -S magnet accepts CMSE / DMSE switches for end-of-stroke sensing. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the rod carries a female M10x1.5 thread.
Airtac TACE Guided Compact Cylinder TACE50X10S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE50X10S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 10 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE50X10S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 50 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE50X10S Is Used
CNC fixture clamping
A 10 mm clamp stroke with about 589 N of usable push at 0.5 MPa secures an aluminium gearbox housing on a machining fixture, while the twin-guide yoke keeps the clamp pad square to the part.
Short-throw ejection
On a carton line, the 10 mm stroke kicks a filled sleeve off a conveyor stop, and the twin guide rods stop the pusher plate twisting under offset side loads.
Press-fit verification
A 50 mm bore pressing a bearing into a pump housing at 1374.4 N (0.7 MPa) gives a pass/fail force check, with CMSE / DMSE switches reporting rod position through the fitted -S magnet.
Is the Airtac TACE Guided Compact Cylinder TACE50X10S the Right Cylinder?
For lighter clamping, the 32 mm bore of this series gives 402.1 N push at 0.5 MPa; if you need more, step up to the 63 mm bore at 1558.6 N. This 50 mm model sits between them with 981.7 N push and 881.2 N pull at 0.5 MPa over a 10 mm stroke. It does not hold position when air is lost - the piston drifts - so fit a rod lock or pilot check valve where a load must stay put. FB, CA, CB, CR and FTC mountings suit the yoke, and the -S magnet on this model lets CMSE / DMSE switches report end of stroke.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE50X10S FAQ
At 0.5 MPa it pushes 981.7 N and pulls 881.2 N; at 0.7 MPa the push rises to 1374.4 N and the pull to 1233.7 N. The theoretical maximum is 200.2 kgf at 1.0 MPa. For sizing, treat about 589 N as the usable push at 0.5 MPa, roughly a 50 kg vertical lift with a 2:1 margin.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and FB, CA, CB, CR and FTC mountings are available. Because this model carries the -S code, CMSE / DMSE reed or solid-state switches can be clamped into the body slots, and a fixed TPU bumper at each end absorbs end-of-stroke energy. When air is lost the piston drifts, so use a rod lock or pilot check valve where a load must stay put.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE50X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.