Airtac TACE Guided Compact Cylinder TACE50X25
The AirTAC Airtac TACE Guided Compact Cylinder TACE50X25 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø50mm bore and 25mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ50 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE50X25
Double acting and non-rotating, the TACE50X25 pairs a 50 mm bore with a 25 mm stroke in an ISO 21287 compact body that saves about 50% of the mounting length of an ISO 15552 profile cylinder. At 0.5 MPa it pushes 981.7 N and pulls 881.2 N; at 0.7 MPa those figures rise to 1374.4 N and 1233.7 N. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or plate stays square without an external guide.
For real-world sizing, plan on roughly 590 N of usable push at 0.5 MPa - about 60% of the rating - which lifts about 50 kg vertically with a 2:1 margin. The hard-anodized aluminium body carries a 16 mm S45C hard-chrome rod with a female M10x1.5 thread, fed through 1/8" PT ports. A fixed TPU bumper absorbs end-of-stroke energy at both ends, speed spans 30-500 mm/s, and the optional -S magnet enables CMSE / DMSE switches; without -S no magnet is fitted.
Airtac TACE Guided Compact Cylinder TACE50X25 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE50X25 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 25 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE50X25
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 50 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE50X25 Is Used
Clamp fixture on a CNC machining centre
The 25 mm stroke clamps aluminium housings in a dedicated fixture; with about 590 N of usable push at 0.5 MPa, the twin-guide yoke keeps the clamp pad square to the part.
Reject pusher on a packaging line
Mounted beside a conveyor, the short ISO 21287 body fits where a full-length profile cylinder will not, kicking off-spec cartons at up to 500 mm/s.
Press-fit station for bushings and pins
A 1374.4 N push at 0.7 MPa seats small bushings into housings, while the non-rotating guide rods hold the tooling aligned through every cycle.
Is the Airtac TACE Guided Compact Cylinder TACE50X25 the Right Cylinder?
At 981.7 N push at 0.5 MPa, the 50 mm bore sits between the 40 mm size (628.3 N) and the 63 mm size (1558.6 N); step down when the load is lighter, up when it is heavier. Air pressure runs 0.15-1.0 MPa (22-145 psi), and the piston drifts if air is lost, so add a rod lock or pilot check valve where a load must stay put. FB flange, CA/CB clevis, CR and FTC mountings all suit this short body, and ordering the optional -S magnet lets CMSE / DMSE switches report position.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE50X25 FAQ
At 0.5 MPa it pushes 981.7 N and pulls 881.2 N; at 0.7 MPa it pushes 1374.4 N and pulls 1233.7 N. The theoretical maximum is 200.2 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof rating, and speed runs 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper absorbs end-of-stroke energy at both ends. FB flange, CA/CB clevis, CR and FTC mountings are available. Position sensing requires the optional -S magnet code, which allows CMSE / DMSE switches; without -S there is no magnet fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE50X25
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.