Airtac TACE Guided Compact Cylinder TACE50X60S
The AirTAC Airtac TACE Guided Compact Cylinder TACE50X60S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø50mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ50 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE50X60S
The TACE50X60S is a double acting, non-rotating compact cylinder built to ISO 21287: a 50 mm bore with 60 mm stroke, a 16 mm hard-chrome-plated S45C rod and 1/8" ports. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or plate stays square without an external guide. At 0.5 MPa it pushes 981.7 N and pulls 881.2 N; at 0.7 MPa that rises to 1374.4 N push and 1233.7 N pull, with a theoretical maximum of 200.2 kgf at 1.0 MPa.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs, guards and gantries where a full-length cylinder will not. Plan for roughly 590 N of real work at 0.5 MPa (about 60% of the push rating), which lifts about 50 kg vertically with a 2:1 margin. The -S magnet this model carries lets CMSE or DMSE switches report position, and fixed TPU bumpers absorb end-of-stroke energy at both ends. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, temperature -20 to +70 C.
Airtac TACE Guided Compact Cylinder TACE50X60S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE50X60S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 60 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE50X60S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE50X60S Is Used
CNC fixture clamping
A 50 mm bore pushing 981.7 N at 0.5 MPa clamps an aluminium gearbox housing in a machining fixture, while the twin-guide yoke keeps the clamp pad square to the datum face over the 60 mm stroke.
Carton lid press station
On a food-line carton closing station the compact body fits under a low guard, and the twin guide rods press the lid straight without a separate guide rail.
Bottling line stopper gate
A bottle stopper gate on a bottling conveyor uses the 60 mm stroke to rise and block the lane; the non-rotating yoke keeps the gate plate from twisting under side load.
Is the Airtac TACE Guided Compact Cylinder TACE50X60S the Right Cylinder?
For this 60 mm duty, a 32 mm TACE gives 402.1 N push at 0.5 MPa while a 63 mm bore reaches 1558.6 N, so the 50 mm sits squarely in the middle for loads near 100 kg. Remember the piston drifts if air is lost - it holds nothing on its own, so add a rod lock or pilot check valve where a load must stay put. Mount with an FB flange, CA/CB clevis, CR or FTC bracket; the rod ends in a female M10x1.5 thread and the PT ports can be ordered as G. This unit already carries the optional -S magnet for CMSE / DMSE switch mounting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE50X60S FAQ
At 0.5 MPa it pushes 981.7 N and pulls 881.2 N. At 0.7 MPa the figures rise to 1374.4 N push and 1233.7 N pull. The theoretical maximum at 1.0 MPa is 200.2 kgf. In practice, plan on about 590 N of usable force at 0.5 MPa, enough to lift roughly 50 kg vertically with a 2:1 margin.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and fixed TPU bumpers absorb end-of-stroke energy at both ends. Mounting options are FB flange, CA/CB clevis, CR and FTC. Because this model carries the -S magnet, CMSE or DMSE reed and solid-state switches can be clamped into the body slots; on units ordered without -S no magnet is fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE50X60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.