Airtac TACE Guided Compact Cylinder TACE50X70
The AirTAC Airtac TACE Guided Compact Cylinder TACE50X70 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø50mm bore and 70mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ50 mm
- Stroke70 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE50X70
The TACE50X70 is a double acting, non-rotating compact cylinder to ISO 21287: a 50 mm bore and 70 mm stroke on twin guide rods mounted in a yoke, so the tooling cannot spin and side load is carried without an external guide. At 0.5 MPa it pushes 981.7 N and pulls 881.2 N; at 0.7 MPa push rises to 1374.4 N, with a theoretical maximum of 200.2 kgf at 1.0 MPa. In practice plan on roughly 589 N of usable force at 0.5 MPa, which is about 50 kg of vertical lift with a 2:1 margin.
The hard-anodized aluminium body with an S45C hard-chrome plated 16 mm rod is built short: it saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs, guards and gantries. A fixed TPU bumper at each end absorbs end-of-stroke energy, the 1/8" port takes PT thread, and the rod end carries a female M10x1.5 thread. Operating range is 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, -20 to +70 C.
Airtac TACE Guided Compact Cylinder TACE50X70 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE50X70 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 70 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE50X70
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE50X70 Is Used
CNC pallet clamping
Clamps aluminium housings on a machining-centre pallet; 981.7 N push at 0.5 MPa holds the part square while the twin guide rods stop the clamp plate rotating.
Gantry vertical lift
Lifts about 50 kg battery trays vertically in an EV assembly gantry, with the 70 mm stroke clearing the fixture and a rod lock added for air-loss safety.
Bushing press-fit station
Presses bronze bushings into pump housings on a compact bench press, using roughly 589 N of working force inside a frame too tight for a full-length body.
Is the Airtac TACE Guided Compact Cylinder TACE50X70 the Right Cylinder?
Size against real forces: the 32 mm bore gives only 402.1 N push at 0.5 MPa, while the 63 mm bore reaches 1558.6 N, so the 50 mm at 981.7 N sits in the middle for medium clamping and lift work. Remember the piston drifts if air is lost - it never holds position - so add a rod lock or pilot check valve for a suspended load. Mount with FB flange, CA/CB clevis, CR or FTC; order the optional -S code if you need the magnet for CMSE / DMSE switches, because without -S no magnet is fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE50X70 FAQ
At 0.5 MPa the 50 mm bore pushes 981.7 N and pulls 881.2 N. At 0.7 MPa push reaches 1374.4 N and pull 1233.7 N. The theoretical maximum is 200.2 kgf at 1.0 MPa. For sizing, treat about 589 N as usable working force at 0.5 MPa, roughly a 50 kg vertical lift with a 2:1 margin.
It is an ISO 21287 short-body cylinder whose hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end and FB, CA, CB, CR or FTC mounting. Position sensing needs the optional -S magnet code: only then can CMSE or DMSE switches be mounted on the body slots.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE50X70
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.