Airtac TACE Guided Compact Cylinder TACE50X75
The AirTAC Airtac TACE Guided Compact Cylinder TACE50X75 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø50mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ50 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE50X75
A 50 mm bore with 75 mm of stroke puts the TACE50X75 in the mid-force class of the AirTAC compact range: it is a double acting, non-rotating cylinder built to ISO 21287, where air both extends and retracts the 16 mm hard-chrome rod and twin guide rods on a yoke stop the tooling rotating while carrying side load. At 0.5 MPa it pushes 981.7 N and pulls 881.2 N; at 0.7 MPa those figures climb to 1374.4 N and 1233.7 N, with a theoretical maximum of 200.2 kgf at 1.0 MPa. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight jigs, guards and gantries where a full-length body will not go.
For real-world sizing, plan on roughly 589 N of usable push at 0.5 MPa (about 0.6 of the rated force), which is enough to lift about 50 kg vertically with a 2:1 margin. The hard-anodized aluminium body and S45C rod run on air filtered to 40 um, across 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s, with a fixed TPU bumper absorbing the stroke ends. This unit ships without a magnet; the optional -S code adds one so CMSE or DMSE switches can be mounted. The rod end carries a female M10x1.5 thread and the port is 1/8" PT.
Airtac TACE Guided Compact Cylinder TACE50X75 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE50X75 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE50X75
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE50X75 Is Used
Fixture clamping on a CNC milling line
The 981.7 N push at 0.5 MPa clamps aluminium housings in a machining fixture, and the twin-guide yoke keeps the clamp plate square to the part without an external guide.
Pick-and-place lift in an electronics assembly cell
With about 50 kg of vertical lift capacity at a 2:1 margin, the 75 mm stroke raises loaded trays between conveyor and workstation inside a compact gantry frame.
Stopper gate on a bottling conveyor
The non-rotating twin rods hold a stopper blade square to the bottle flow, and the fixed TPU bumper quiets each extend and retract cycle at up to 500 mm/s.
Is the Airtac TACE Guided Compact Cylinder TACE50X75 the Right Cylinder?
Work both ways before committing: a TACE32X75 pushes 402.1 N at 0.5 MPa and a TACE63X75 reaches 1558.6 N, so the 50 mm bore at 981.7 N sits squarely between them for clamping, pressing and lifting jobs. If the load must stay put when air is lost, add a rod lock or pilot check valve - the piston will drift without one. FB flange, CA or CB clevis, CR and FTC mountings suit most fixtures, and the optional -S magnet enables CMSE / DMSE position switches. The 75 mm stroke is a standard length for this bore, which runs to 250 mm.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE50X75 FAQ
At 0.5 MPa it pushes 981.7 N and pulls 881.2 N; at 0.7 MPa it pushes 1374.4 N and pulls 1233.7 N; the theoretical maximum is 200.2 kgf at 1.0 MPa. It runs on 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s, with a 16 mm rod, a female M10x1.5 rod thread and a 1/8" PT port.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper sits at both stroke ends to absorb end-of-travel energy. Sensing is an option, not a default: order the -S code to get the magnet that lets CMSE or DMSE switches read position. Mounting choices are FB flange, CA or CB clevis, CR and FTC.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE50X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.