Airtac TACE Guided Compact Cylinder TACE50X80S
The AirTAC Airtac TACE Guided Compact Cylinder TACE50X80S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø50mm bore and 80mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ50 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE50X80S
A double acting, non-rotating compact cylinder built to ISO 21287, the TACE50X80S pairs a 50 mm bore with an 80 mm stroke and twin guide rods on a yoke that stop the tooling rotating and carry side load. At 0.5 MPa it pushes 981.7 N and pulls 881.2 N; at 0.7 MPa those figures rise to 1374.4 N and 1233.7 N, with a theoretical 200.2 kgf at 1.0 MPa. The hard-anodized aluminium body carries a 16 mm S45C hard-chrome rod ending in a female M10x1.5 thread, and air supply is through 1/8" PT ports.
Because the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, it slots into tight jigs, guards and gantries where a full-length body will not fit. For real work, plan on roughly 589 N of usable push at 0.5 MPa (about 0.6 of the rated force), or think of it as lifting about 50 kg vertically with a 2:1 margin. The -S magnet this model carries lets CMSE / DMSE reed or solid-state switches read position along the body slots. A fixed TPU bumper at each end absorbs end-of-stroke energy; speed spans 30-500 mm/s and pressure 0.15-1.0 MPa (22-145 psi).
Airtac TACE Guided Compact Cylinder TACE50X80S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE50X80S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 80 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE50X80S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE50X80S Is Used
Press-fit station for bearing bushings
On an assembly cell seating bushings into aluminium housings, the 981.7 N push at 0.5 MPa handles light press work, while the twin-guide yoke keeps the arbor square to the bore without an external guide.
Pusher gate on a packaging conveyor
The 80 mm stroke swings a divert gate across a carton lane, and the non-rotating guide rods hold the paddle aligned stroke after stroke at 30-500 mm/s.
Clamp fixture on a CNC fixture plate
Clamping aluminium blanks during milling, the cylinder grips with 981.7 N and retracts with 881.2 N to pull the clamp arm clear of the cutter and chips.
Is the Airtac TACE Guided Compact Cylinder TACE50X80S the Right Cylinder?
Step down to the TACE40 for lighter duty: its 40 mm bore pushes 628.3 N at 0.5 MPa against this model's 981.7 N. If the job needs more muscle, the 63 mm bore delivers 1558.6 N at the same pressure. Remember the piston drifts when air is lost, so add a rod lock or pilot check valve wherever a load must stay held. Mounting choices are FB flange, CA/CB clevis, CR and FTC, and the fitted -S magnet accepts CMSE / DMSE switches in the body slots. Strokes to 250 mm are standard for this bore, so the 80 mm stroke sits comfortably inside the range.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE50X80S FAQ
At 0.5 MPa it pushes 981.7 N and pulls 881.2 N. At 0.7 MPa the push rises to 1374.4 N and the pull to 1233.7 N. The theoretical maximum is 200.2 kgf at 1.0 MPa. Operating pressure spans 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof rating, on air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy. Mounting options are FB flange, CA/CB clevis, CR and FTC. Because this model carries the optional -S magnet, CMSE / DMSE reed or solid-state switches can be clamped in the body slots to report rod position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE50X80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.