Airtac TACE Guided Compact Cylinder TACE50X90S
The AirTAC Airtac TACE Guided Compact Cylinder TACE50X90S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø50mm bore and 90mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ50 mm
- Stroke90 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE50X90S
The TACE50X90S is a double acting, non-rotating compact cylinder built to ISO 21287: a 50 mm bore drives a 16 mm hard-chromed S45C rod through a 90 mm stroke, while twin guide rods on a yoke stop the tooling rotating and carry side load. At 0.5 MPa it pushes 981.7 N and pulls 881.2 N; at 0.7 MPa those figures rise to 1374.4 N and 1233.7 N, with a theoretical 200.2 kgf at 1.0 MPa.
The hard-anodized aluminium body with a fixed TPU bumper at each end saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it drops into tight jigs, guards and gantries. Plan on roughly 590 N of usable push at 0.5 MPa, which lifts about 50 kg vertically with a 2:1 margin. Air supply is 0.15-1.0 MPa (22-145 psi), speed range 30-500 mm/s, and the -S code on this model carries the magnet so CMSE / DMSE switches can be fitted; the 1/8" port takes PT thread.
Airtac TACE Guided Compact Cylinder TACE50X90S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE50X90S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 90 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE50X90S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 50 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE50X90S Is Used
CNC fixture clamping
Clamps an aluminium housing square on a machining pallet: the twin-guide yoke keeps the clamp plate from rotating under 981.7 N of push, and the 90 mm stroke clears part loading.
Reject gate on a bottling line
Pushes off-spec bottles off a conveyor at up to 500 mm/s; the compact body mounts under the guard rail where a full-length profile cylinder will not fit, and CMSE switches confirm gate position.
Carton ejection from an erector
Ejects formed cartons from a packer station with about 590 N of usable force at 0.5 MPa; the 90 mm stroke sweeps the full chute width and the TPU bumper quiets each end of travel.
Is the Airtac TACE Guided Compact Cylinder TACE50X90S the Right Cylinder?
With 981.7 N push (881.2 N pull) at 0.5 MPa, the 50 mm bore sits between the 32 mm size (402.1 N push) and the 63 mm size (1558.6 N push) in the same series. If the load is light, the 40 mm bore at 628.3 N push may cut cost; if you need more reserve, step up to 63 mm. The rod drifts when air is lost, so for a held load add a rod lock or pilot check valve. Mounting options are FB flange, CA/CB clevis, CR and FTC, the female M10x1.5 rod thread suits standard rod accessories, and the fitted -S magnet lets CMSE / DMSE switches report end positions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE50X90S FAQ
At 0.5 MPa it pushes 981.7 N and pulls 881.2 N; at 0.7 MPa push is 1374.4 N and pull 1233.7 N; the theoretical maximum is 200.2 kgf at 1.0 MPa. For real work, budget about 590 N of push at 0.5 MPa, which lifts roughly 50 kg vertically with a 2:1 margin.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end absorbing end-of-stroke shock. FB flange, CA/CB clevis, CR and FTC mountings are available. Because this model carries the -S magnet, CMSE / DMSE reed or solid-state switches mount directly in the body slots; the port is 1/8" PT.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE50X90S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.