Airtac TACE Guided Compact Cylinder TACE63X10
The AirTAC Airtac TACE Guided Compact Cylinder TACE63X10 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE63X10
Double acting and non-rotating, the TACE63X10 packs a 63 mm bore and a short 10 mm stroke into an ISO 21287 compact body whose hard-anodized aluminium barrel saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs, guards and gantries. Twin guide rods on a yoke stop the tooling rotating and carry side load, keeping a gripper or press plate square without any external guide.
At 0.5 MPa this bore pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa it reaches 2182.1 N, with a theoretical 317.9 kgf at 1.0 MPa. Plan on roughly 935 N of usable force at 0.5 MPa, and with a 2:1 margin the rod lifts about 79 kg vertically. A fixed TPU bumper absorbs energy at both ends of the stroke, the 16 mm hard-chrome S45C rod carries an M10x1.5 female thread, and the optional -S magnet lets you fit CMSE / DMSE switches.
Airtac TACE Guided Compact Cylinder TACE63X10 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE63X10 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE63X10
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE63X10 Is Used
CNC fixture clamping
Clamping aluminium gearbox housings on a machining-centre fixture: the 10 mm stroke grips in seconds and the twin-guide yoke holds the clamp pad square under 1558.6 N of push.
Capping and crimp press
A short-press crimp station on a cosmetic-filling line, where the compact ISO 21287 body fits inside a tight guard and delivers 2182.1 N at 0.7 MPa.
Bottle push-off gate
Push-off gates diverting PET bottles between conveyor lanes; the non-rotating twin guide rods keep the pusher plate aligned without external rails.
Is the Airtac TACE Guided Compact Cylinder TACE63X10 the Right Cylinder?
At 1558.6 N push (0.5 MPa), the 63 mm bore sits between the 50 mm bore (981.7 N) and the 80 mm bore (2513.3 N): step down for lighter clamps or up for heavy tooling. Because air acts on both ports, the piston drifts if pressure is lost, so add a rod lock or pilot check valve where a load must stay put. Mount with the FB flange, CA/CB clevis, CR or FTC feet, and order the optional -S magnet only if CMSE / DMSE position switches are planned.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE63X10 FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa the figures are 2182.1 N push and 2041.3 N pull. The theoretical maximum is 317.9 kgf at 1.0 MPa. It runs on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um at 30-500 mm/s, fed through a 1/8" port.
It is an ISO 21287 compact cylinder whose hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy. Mounting choices are the FB flange, CA/CB clevis, CR and FTC feet, with PT 1/8" ports. The -S magnet is optional: order it only if you intend to fit CMSE or DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE63X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.